
Power supply
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.

USB replica of the Wang LapTop Computer keyboard - PCB + Pico firmware
Wang WLTC USB is an open-source printed circuit board by fpracek, from the fpracek/wltc-usb-keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 336.5 × 178 mm with 185 parts on 147 nets, routed with 919 tracks and 23 vias.
Its parts include 90 diodes and 90 switches. It belongs with the keyboards and input boards and the RP2040 boards of this library.
KiCad 7 project for the replica keyboard PCB: a 7x16 diode matrix wired
to a Raspberry Pi Pico footprint, laid out to match the real WLTC
keyboard's physical key positions (reconstructed from a photo of a real
unit, cross-checked against the PORT_NAME/PORT_CODE table in the
MAME driver so the firmware's HID output lands on the exact keys the
driver expects - see ../firmware/).
Wang WLTC USB.kicad_pro / .kicad_sch / .kicad_pcb - the project,
schematic, and board.footprints/ - two local footprint libraries used by the board
(Cherry MX switches, keycap stabilizers).production/ - the fabrication package as exported for ordering the
board: gerbers (Wang_WLTC_USB.zip), BOM, component positions, and
netlist.GPIO assignment (ROW0-ROW6 -> GPIO0-GPIO6, COL0-COL15 -> GPIO7-GPIO22)
and the diode orientation are documented in the firmware's
src/keymap.c, read directly off this project's netlist rather than
guessed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | D | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +74 |
| 77 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +61 |
| 4 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.25u | SW1, SW2, SW3, SW4 |
| 3 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.75u | SW53, SW84, SW86 |
| 3 | SW_stab | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | ST36, ST65, ST68 |
| 2 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.50u | SW37, SW79 |
| 2 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u | SW36, SW65 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.25u | SW68 |
| 1 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_7.00u | SW85 |
| 1 | SW_stab | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_7.00u | ST85 |

thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.


Tjeerdie/SPECTRE
Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.


Thorinair/Avalon-Harmonics
A collection of Avalon Harmonics branded synthesizer modules.

Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem

hackzone/cz20-badge
Node.js build static site for using with Hatchery over WebUSB

nearestexit/t80-5000
QMK Compatible RP2040-based USB PCBs for the Cherry G80-5000 and the G80-5700.
It measures 336.5 × 178 mm and has 2 copper layers, 1.6 mm thick.
185 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fpracek/wltc-usb-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/Wang WLTC USB.kicad_pcb and its schematic hardware/Wang WLTC USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).