
ESP8266-Sentinel Kinetic Wired Remote
alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller

Parallel to I2C adapter for KS0108 based graphical LCDs using two PCF8574
Ks0108 i2c is an open-source printed circuit board by fpp3, from the fpp3/ks0108_i2c_pcf8574 repository on GitHub. It is a 2-layer board of 59.2 × 33.3 mm with 15 parts on 35 nets, routed with 275 tracks and 24 vias.
It is built around the PCF8574T, NHD-12864AZ-NSW-BBW-TR and SS8050. Its parts include 3 resistors, 2 ICs, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | Jumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP3, JP4 |
| 2 | PCF8574T | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1, U2 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J1 |
| 1 | G*** | kibuzzard-67CB5217 | kibuzzard-67CB5217 |
| 1 | G*** | kibuzzard-67CB51C3 | kibuzzard-67CB51C3 |
| 1 | NHD-12864AZ-NSW-BBW-TR | LibraryLoader:NHD-12864AZ-NSW-BBW-TR_NHD12864AZNSWBBWTR | DS1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |

alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller





NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software


It measures 59.2 × 33.3 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the PCF8574T, NHD-12864AZ-NSW-BBW-TR and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fpp3/ks0108_i2c_pcf8574 repository on GitHub, at the commit this page was made from: the board is ks0108_i2c.kicad_pcb and its schematic ks0108_i2c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fpp3 before reusing the design.