2 layers120 × 80 mm
2 layers70.9 × 56.9 mm
PlasticBottleRecycler pcb
fpp3/PlasticBottleRecycler-pcb- Size
- 70.9 × 56.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 38
- Pads
- 119
- Tracks, vias
- 278, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jan 2025
- Updated
- 8 Mar 2025
Overview
PlasticBottleRecycler pcb is an open-source printed circuit board by fpp3, from the fpp3/PlasticBottleRecycler-pcb repository on GitHub. It is a 2-layer board of 70.9 × 56.9 mm with 28 parts on 38 nets, routed with 278 tracks and 12 vias.
It is built around the STM8S005K6T6C, BC337 and IRF3205. Its parts include 8 connectors, 6 resistors, 4 switches, 3 capacitors and 2 transistors. It belongs with the STM8 boards of this library.
Main components
3
STM8S005K6T6C
LQFP-32(7x7)-40℃~+85℃ 10bit 128Byte 16MHz 2.95V~5.5V 25 2KB 32KB 8 Bit Built-in FLASH STM8 LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
IRF3205
TO-220MOSFETsMinos
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R4, R5 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2, SW3, SW4 |
| 2 | 100n | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C5 |
| 1 | +12V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | +5V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J8 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100K | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | BC337 | PCM_Package_TO_SOT_THT_AKL:TO-92_Inline_Wide_CBE | Q2 |
| 1 | FAN1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | G*** | kibuzzard-67C1DC92 | kibuzzard-67C1DC92 |
| 1 | G*** | kibuzzard-679458C4 | kibuzzard-679458C4 |
| 1 | HEATER | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | IRF3205 | PCM_Package_TO_SOT_THT_AKL:TO-220-3_Vertical_GDS | Q1 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | NTC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | STM8S005K6T6C | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWIM | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J3 |
Similar boards
- 2 layers
- 2 layers77.7 × 73.2 mm
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0 - 2 layers50.2 × 73 mm
- 2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers90 × 44 mm
- 2 layers80 × 100 mm
- 4 layers104.1 × 132.6 mm
Questions
How big is the PlasticBottleRecycler pcb PCB?
It measures 70.9 × 56.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PlasticBottleRecycler pcb use?
28 parts, built around the STM8S005K6T6C, BC337 and IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PlasticBottleRecycler pcb KiCad files?
From the fpp3/PlasticBottleRecycler-pcb repository on GitHub, at the commit this page was made from: the board is PlasticBottleRecycler-pcb.kicad_pcb and its schematic PlasticBottleRecycler-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PlasticBottleRecycler pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask fpp3 before reusing the design.