4 layers
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 27
- Pads
- 43
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Oct 2026
- Updated
- 6 Nov 2026
Overview
Wifi is an open-source printed circuit board by foxwithahdie, from the foxwithahdie/vr-controller repository on GitHub. It is a 2-layer board with 3 parts on 27 nets.
It is built around the ESP32-H2FH4. Its parts include 1 IC and 1 crystal. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Main components
1Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | ESP32-H2 | Espressif:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm | U1 |
| 1 | ~ | esp_wifi:ANT_MIFA_TI_AN043 | A1 |
Questions
What parts does the Wifi use?
3 parts, built around the ESP32-H2FH4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wifi KiCad files?
From the foxwithahdie/vr-controller repository on GitHub, at the commit this page was made from: the board is pcb/wifi/wifi.kicad_pcb and its schematic pcb/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wifi design in my own project?
Its repository states no licence, so its author keeps all rights: ask foxwithahdie before reusing the design.
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
