2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers
Sensor
FossTag/SensorFree software laser tag game. This repository contains PCB designs for the sensor module(s).
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 4
- Pads
- 23
- Tracks, vias
- 33, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Nov 2022
- Updated
- 21 Nov 2022
Overview
Sensor is an open-source printed circuit board by FossTag, from the FossTag/Sensor repository on GitHub. It is a 2-layer board with 7 parts on 4 nets, routed with 33 tracks and 4 vias.
Its parts include 2 ICs, 2 connectors, 1 capacitor and 1 resistor. It belongs with the sensors and measurement boards of this library.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x03_Male | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief | J1, J2 |
| 2 | TSOP38G36 | OptoDevice:Vishay_MINICAST-3Pin | U1, U2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
The 6 most common of 7 parts.
Questions
What parts does the Sensor use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor KiCad files?
From the FossTag/Sensor repository on GitHub, at the commit this page was made from: the board is Sensor.kicad_pcb and its schematic Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask FossTag before reusing the design.
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
