Skip to the content
2 layers120 × 50 mmLED strip test, the printed circuit board in 3D

Hardware repository for the FORT system

Size
120 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
18
Pads
175
Tracks, vias
130, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
8 Jul 2019
Updated
22 May 2026

Overview

LED strip test is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 120 × 50 mm with 41 parts on 18 nets, routed with 130 tracks and 0 vias.

Its parts include 18 connectors and 8 diodes. It belongs with the lEDs and displays boards of this library.

README

README.md

FORmicidae Tracker (FORT) : Hardware Blueprints and Firmware

DOI

The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.

This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.

Licenses

Files in this repository are licensed under either one of the two following licenses:

  • Files under the ecad folder, unless specified otherly, are licensed under CERN OSHL v1.2.
  • All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.

Parts

41
QtyValueFootprintReferences
16Conn_01x06fort:Pin_Header_Straight_1x06_Pitch2.54mm_CenteredJ3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18
9TESTWire_Pads:SolderWirePad_single_1-5mmDrillTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9
8LED_PADfort:OSRAM_Platinium_DragonD1, D2, D3, D4, D5, D6, D7, D8
2Conn_01x01Wire_Pads:SolderWirePad_single_1-5mmDrillJ1, J2

The 35 most common of 41 parts.

More from formicidae-tracker/hardware

12
  • 2 layers100 × 100 mmMaster old, the printed circuit board in 3D

    Master old

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    663 parts1
  • 2 layers182.9 × 54.6 mmEvaluation Boards, the printed circuit board in 3D

    Evaluation Boards

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    171 parts1
  • 2 layers84 × 60 mmHelios, the printed circuit board in 3D

    Helios

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    143 parts1
  • 2 layers70 × 100 mmLED driver, the printed circuit board in 3D

    LED driver

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    118 parts1
  • 2 layers55 × 95 mmMaster, the printed circuit board in 3D

    Master

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    90 parts1
  • 2 layers80 × 45 mmZeus, the printed circuit board in 3D

    Zeus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    86 parts1
  • 2 layers120 × 120 mmLED strip test panelized, the printed circuit board in 3D

    LED strip test panelized

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    82 parts1
  • 2 layers65 × 50 mmNyx, the printed circuit board in 3D

    Nyx

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    77 parts1
  • 2 layers80 × 45 mmCelaeno, the printed circuit board in 3D

    Celaeno

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    73 parts1
  • 2 layers57 × 63 mmNotus, the printed circuit board in 3D

    Notus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers55 × 50 mmPhaeton, the printed circuit board in 3D

    Phaeton

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers72 × 36 mmArke, the printed circuit board in 3D

    Arke

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    49 parts1

Similar boards

  • 2 layers70 × 35 mmTLF35584 breakout, the printed circuit board in 3D

    TLF35584 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    41 parts1.2k
  • 2 layers270 × 11 mmDaylight Disco, the printed circuit board in 3D

    Daylight Disco

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    41 parts1.1kGPL-3.0
  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915
  • 2 layers45 × 25 mmEasy PD Sink, the printed circuit board in 3D

    Easy PD Sink

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    41 parts599
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    41 parts517GPL-2.0
  • 2 layers37 × 15 mmCanTactDist, the printed circuit board in 3D

    CanTactDist

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    41 parts373GPL-3.0
  • 2 layers20.3 × 69.7 mmPG attiny404, the printed circuit board in 3D

    PG attiny404

    fabiansteiner/OpenValve

    3D-printable pinch valve for irrigation and sensor-driven liquid control.

    41 parts276CERN-OHL-S-2.0

Questions

How big is the LED strip test PCB?

It measures 120 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED strip test use?

41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED strip test KiCad files?

From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/helios/LED_strip_test/LED_strip_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED strip test design in my own project?

Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.