Skip to the content
2 layersEmc2302-test, the printed circuit board in 3D

Hardware repository for the FORT system

Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
14
Pads
47
Tracks, vias
140, 1
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Jul 2019
Updated
22 May 2026

Overview

Emc2302-test is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board with 15 parts on 14 nets, routed with 140 tracks and 1 via.

It is built around the EMC2302-1-AIZL-TR and CPDT-5V0-HF. Its parts include 6 resistors, 4 connectors, 2 diodes, 1 capacitor and 1 IC.

Main components

2

README

README.md

FORmicidae Tracker (FORT) : Hardware Blueprints and Firmware

DOI

The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.

This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.

Licenses

Files in this repository are licensed under either one of the two following licenses:

  • Files under the ecad folder, unless specified otherly, are licensed under CERN OSHL v1.2.
  • All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.

Parts

15
QtyValueFootprintReferences
42k2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalR4, R5, R6, R7
247kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalR2, R3
2CPDT-5V0-HFPackage_TO_SOT_SMD:SOT-23D1, D2
2Conn_01x04FORT:Molex_KK-47053-04_04x2.54mm_StraightJ2, J4
1100nFCapacitor_SMD:C_0603_1608MetricC1
1Conn_01x02Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.5_1x02_P3.50mm_VerticalJ1
1Conn_01x04FORT:Micro-Match_4_THJ3
1EMC2302-1-AIZL-TRPackage_SO:MSOP-10_3x3mm_P0.5mmU1

The 14 most common of 15 parts.

More from formicidae-tracker/hardware

12
  • 2 layers100 × 100 mmMaster old, the printed circuit board in 3D

    Master old

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    663 parts1
  • 2 layers182.9 × 54.6 mmEvaluation Boards, the printed circuit board in 3D

    Evaluation Boards

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    171 parts1
  • 2 layers84 × 60 mmHelios, the printed circuit board in 3D

    Helios

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    143 parts1
  • 2 layers70 × 100 mmLED driver, the printed circuit board in 3D

    LED driver

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    118 parts1
  • 2 layers55 × 95 mmMaster, the printed circuit board in 3D

    Master

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    90 parts1
  • 2 layers80 × 45 mmZeus, the printed circuit board in 3D

    Zeus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    86 parts1
  • 2 layers120 × 120 mmLED strip test panelized, the printed circuit board in 3D

    LED strip test panelized

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    82 parts1
  • 2 layers65 × 50 mmNyx, the printed circuit board in 3D

    Nyx

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    77 parts1
  • 2 layers80 × 45 mmCelaeno, the printed circuit board in 3D

    Celaeno

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    73 parts1
  • 2 layers57 × 63 mmNotus, the printed circuit board in 3D

    Notus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers55 × 50 mmPhaeton, the printed circuit board in 3D

    Phaeton

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers72 × 36 mmArke, the printed circuit board in 3D

    Arke

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    49 parts1

Similar boards

  • 4 layers65 × 56 mmPi HAT IO, the printed circuit board in 3D

    Pi HAT IO

    iNkawuVervetProject/VerTIGo

    Portable Zoo based Animal-Computer Interactive setup

    57 parts1
  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT

Questions

What parts does the Emc2302-test use?

15 parts, built around the EMC2302-1-AIZL-TR and CPDT-5V0-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Emc2302-test KiCad files?

From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/misc/emc2302-test/emc2302-test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Emc2302-test design in my own project?

Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.