2 layers86 × 74 mm
2 layers60 × 60 mm
WT32-ETH01-WLED CTRL
foorschtbar/WT32-ETH01-WLED-CTRL3A wired (Ethernet/LAN) WLED Controller
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 41
- Pads
- 98
- Tracks, vias
- 134, 51
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Dec 2024
- Updated
- 1 Jan 2025
Overview
WT32-ETH01-WLED CTRL is an open-source printed circuit board by foorschtbar, from the foorschtbar/WT32-ETH01-WLED-CTRL repository on GitHub. It is a 2-layer board of 60 × 60 mm with 20 parts on 41 nets, routed with 134 tracks and 51 vias.
It is built around the CH340C, WT32-ETH01 and SK6812SIDE-A. Its parts include 7 resistors, 3 capacitors, 3 diodes, 2 ICs and 2 switches.
Main components
3
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersWT32-ETH01
-Ethernet ModulesWireless-tag
SK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdWT32-ETH01 WLED CTRL
A wired (Ethernet/LAN) WLED Controller
Links
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R7 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 1 | 1000uF | Capacitor_SMD:C_Elec_10x10.2 | C3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | Boot | Pushbutton 3x4x2mm:Pushbutton 3x4x2mm | SW2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Fuse | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | RXD | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Reset | Pushbutton 3x4x2mm:Pushbutton 3x4x2mm | SW1 |
| 1 | SK6812SIDE | SK6812SIDE:SK6812SIDE | LED1 |
| 1 | TXD | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WT32-ETH01 | WT32-ETH01:WT32-ETH01 | U1 |
The 19 most common of 20 parts.
Questions
How big is the WT32-ETH01-WLED CTRL PCB?
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WT32-ETH01-WLED CTRL use?
20 parts, built around the CH340C, WT32-ETH01 and SK6812SIDE-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WT32-ETH01-WLED CTRL KiCad files?
From the foorschtbar/WT32-ETH01-WLED-CTRL repository on GitHub, at the commit this page was made from: the board is WT32-ETH01 WLED CTRL.kicad_pcb and its schematic WT32-ETH01 WLED CTRL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WT32-ETH01-WLED CTRL design in my own project?
Its repository states no licence, so its author keeps all rights: ask foorschtbar before reusing the design.
Similar boards
- 2 layers81.2 × 81.2 mm
- 2 layers100 × 60 mm
Lateral led controller
cyberboy666/lateral_led_controller
hardware network controller for addressable led installations
30 parts8GPL-3.0 - 2 layers130 × 87 mm
Door controller
MetaMakersCooperative/M2C_Yet_Another_Door_Controller
Proof of concept for new door controller design using a WT32-ETH01.
35 parts1GPL-3.0 - 2 layers120 × 80 mm
- 2 layers60.3 × 73.8 mm
- 2 layers107 × 87 mm
Eth01-24v
loack/ESP32-ETH01-WifiMQTT-Controller
Contrôleur générique d'I/O pour WT32-ETH01 avec Ethernet prioritaire et fallback WiFi.
23 parts - 2 layers45 × 55.5 mm
PCB Access
LuisMiguel-efe/unikey
Sistema inteligente de control de acceso universitario mediante huella dactilar, con autenticación biométrica, FastAPI, MongoDB y Angular.
6 parts