

JTAGFinder
JTAGFinder hardware project
- Size
- 90 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 133
- Pads
- 458
- Tracks, vias
- 1,897, 135
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Oct 2023
- Updated
- 13 Oct 2024
Overview
JTAGFinder is an open-source printed circuit board by fmaw, from the fmaw/JTAGFinder_hw repository on GitHub. It is a 4-layer board of 90 × 70 mm with 94 parts on 133 nets, routed with 1,897 tracks and 135 vias.
It is built around the P8X32A-Q44, AD8655AR and FT232RL, with the SN74S1051D, M24512E-FMN6TP and MIC2025-2YM among its other parts. Its parts include 38 resistors, 27 capacitors, 12 ICs, 5 connectors and 2 diodes.
Main components
9P8X32A-Q44
QFP4432-Bit 8-Cog Multiprocessor Microcontroller Propeller ChipPARALLAX SEMICONDUCTORUncategorisedAD8655AR
SOIC8Low Noise, Precision CMOS AmplifierAnalog DevicesUncategorisedFT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersSN74S1051D
SOIC-16SOIC-16 Specialty Logic ROHSTexas InstrumentsSpecialty LogicM24512E-FMN6TP
SO-8-40℃~+85℃ 1.6V~5.5V 1MHz 200 Years 330nA 360uA 4,000,000 Cycles 4ms 512Kbit Hardware write protection function、Software write protection function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SO-8 EEPROM ROHSSTMicroelectronicsEEPROMMIC2025-2YM
SOIC-8-40℃~+85℃ 1 2.7V~5.5V 500mA 90mΩ Active Low High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Over Temperature Protection SOIC-8 Power Distribution Switches ROHSMicrochip TechnologyPower Distribution SwitchesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesWP59EGW
SIP-3-2.54mm-40℃~+85℃ 20mA 2V、2.2V 30° 565nm、627nm 568nm、617nm 5mm round lamp head 60mcd 62.5mW、75mW Common Cathode Frosted White Lens Red, Yellow Green SIP-3-2.54mm LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 1k | Resistor_SMD:R_1206_3216Metric | R12, R13, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +10 |
| 15 | 100nF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C7, C9, C13, C15, C19, C20, C21, C22, C23, C24, C25, C26, C27 |
| 6 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 4 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C11, C12, C14, C16 |
| 4 | MH | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 3 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1, J2, J3 |
| 3 | LFS0108 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U8, U9, U10 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric | R7, R8 |
| 2 | 10nF | Capacitor_SMD:C_1206_3216Metric | C1, C8 |
| 2 | 18pF | Capacitor_SMD:C_1206_3216Metric | C17, C18 |
| 2 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C6, C10 |
| 2 | SN74S1051 | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm | U11, U12 |
| 2 | TBD | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 15uH | Inductors_SMD:L_1.4x5.0mm_CM45_BOURNS_Series | L2 |
| 1 | 18k | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 5MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 8.2k | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | AD8655 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U7 |
| 1 | BAT54 | Diode_SMD:D_SOD-323 | D1 |
| 1 | Bus_PCI_Express_x1_free_pins_socket | Connector_EdgeBoard:PCI-E_x1_Socket_UMAX_3091-10100T | J6 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 1 | Fuse | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | L_Ferrite | Resistor_SMD:R_1206_3216Metric | L1 |
| 1 | M24512E-FMN6TP | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MIC2025-2YM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | P8X32A-Q44 | Package_QFP:LQFP-44_10x10mm_P0.8mm | U13 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | TLV74033 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
| 1 | WP59EGW | LED_THT:LED_D5.0mm-3 | D2 |
Similar boards
- 6 layers36 × 38 mm

- 2 layers177.8 × 76.2 mm

- 2 layers25.5 × 110 mm

- 4 layers71.1 × 99.7 mm

- 2 layers88.9 × 106 mm

- 4 layers150 × 100 mm

- 2 layers99.7 × 80 mm

- 2 layers136.8 × 87 mm

Questions
How big is the JTAGFinder PCB?
It measures 90 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the JTAGFinder use?
94 parts, built around the P8X32A-Q44, AD8655AR, FT232RL and SN74S1051D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JTAGFinder KiCad files?
From the fmaw/JTAGFinder_hw repository on GitHub, at the commit this page was made from: the board is JTAGFinder.kicad_pcb and its schematic JTAGFinder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JTAGFinder design in my own project?
Its repository states no licence, so its author keeps all rights: ask fmaw before reusing the design.