

Esp-12F
Designing and building electronics cards for own projects.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 13
- Pads
- 61
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Nov 2018
- Updated
- 14 Oct 2019
Overview
Esp-12F is an open-source printed circuit board by flukedf, from the flukedf/PCB-Cards repository on GitHub. It is a 2-layer board with 19 parts on 13 nets.
It is built around the ESP-12F and AMS1117-3.3. Its parts include 8 resistors, 5 capacitors, 2 ICs, 2 switches and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
2ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 12k | Resistors_SMD:R_1206_HandSoldering | R4, R5, R7, R8 |
| 3 | 470 | Resistors_SMD:R_1206_HandSoldering | R1, R2, R9 |
| 2 | 470pF | Capacitors_SMD:C_1206_HandSoldering | C1, C5 |
| 1 | 100uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C4 |
| 1 | 12K | Resistors_SMD:R_1206_HandSoldering | R6 |
| 1 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C3 |
| 1 | AMS1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U2 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMD | U1 |
| 1 | Power | w_smd_leds:Led_PLCC2_3528 | D1 |
| 1 | RST | w_switch:smd_push | SW1 |
| 1 | SW_Push | w_switch:smd_push | SW2 |
| 1 | UART | w_pin_strip:pin_strip_3 | J1 |
More from flukedf/PCB-Cards
12- 2 layers200 × 74 mm

- 2 layers200.7 × 84.8 mm

- 2 layers

SeguridadPerimetral
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
72 parts - 2 layers60 × 150 mm

20170409 remote tht
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
53 parts - 2 layers110 × 56 mm

- 2 layers

- 2 layers90.2 × 85.1 mm

Contador ascendente
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
23 parts - 2 layers52.8 × 42.7 mm

- 2 layers51.4 × 64.1 mm

- 2 layers133.4 × 35.6 mm

- 2 layers142.2 × 25.4 mm

- 2 layers7.7 × 23.2 mm

Similar boards
- 2 layers49.4 × 35.8 mm

WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT - 2 layers69.9 × 69.9 mm

- 2 layers73.1 × 18.3 mm

RJ10Adapter
klein0r/pcb-ttl-ftdi-esp-adapter
PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)
16 parts25MIT - 4 layers44.5 × 22.5 mm

- 2 layers84.3 × 56.9 mm

Ebus
piwko28/smart-home-ebus-adapter
eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.
51 parts18GPL-3.0 - 2 layers67.1 × 62.2 mm

- 2 layers63.9 × 81.7 mm

- 2 layers80 × 48.8 mm

ESP8266-Sentinel Kinetic Wired Remote
alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller
48 parts4CERN-OHL-S-2.0
Questions
What parts does the Esp-12F use?
19 parts, built around the ESP-12F and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp-12F KiCad files?
From the flukedf/PCB-Cards repository on GitHub, at the commit this page was made from: the board is Esp-12F/Esp-12F.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp-12F design in my own project?
Its repository states no licence, so its author keeps all rights: ask flukedf before reusing the design.