2 layers17.5 × 33 mm
2 layers37 × 18.2 mm
Supply2usb
florolf/electronics-utilsLittle helpers
- Size
- 37 × 18.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 4
- Pads
- 16
- Tracks, vias
- 9, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Oct 2022
- Updated
- 16 Dec 2023
Overview
Supply2usb is an open-source printed circuit board by florolf, from the florolf/electronics-utils repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 37 × 18.2 mm with 8 parts on 4 nets, routed with 9 tracks and 0 vias.
Its parts include 3 resistors and 3 connectors.
README
logic-breakout/README.mdlogic-breakout
Solder-in adapter for cheap chinese logic analyzers follwing the quasi-standard CH1-8 and GND pinouts. Simply solder Kynar wire to this board and your DUT.
Cheap enough to just have a bunch of and leave them attached to your DUTs, which keeps the pin mapping clear and consistent while being able to freely move the LA around.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TBD | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 4mm | local:Pomona_72918 | J1, J2 |
| 2 | ZipTie | local:Ziptie_3.6mm | H1, H2 |
| 1 | USB_A | local:Cvilux_CU01SAV0S00 | J3 |
Questions
How big is the Supply2usb PCB?
It measures 37 × 18.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Supply2usb use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Supply2usb KiCad files?
From the florolf/electronics-utils repository on GitHub, at the commit this page was made from: the board is supply2usb/supply2usb.kicad_pcb and its schematic logic-breakout/logic-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Supply2usb design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from florolf/electronics-utils
2- 2 layers22 × 53 mm
Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0