2 layers37 × 18.2 mm
2 layers17.5 × 33 mm
Logic breakout
florolf/electronics-utilsLittle helpers
- Size
- 17.5 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 21
- Tracks, vias
- 36, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Oct 2022
- Updated
- 16 Dec 2023
Overview
Logic breakout is an open-source printed circuit board by florolf, from the florolf/electronics-utils repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 17.5 × 33 mm with 12 parts on 10 nets, routed with 36 tracks and 30 vias.
It belongs with the interfaces and adapters boards of this library.
README
logic-breakout/README.mdlogic-breakout
Solder-in adapter for cheap chinese logic analyzers follwing the quasi-standard CH1-8 and GND pinouts. Simply solder Kynar wire to this board and your DUT.
Cheap enough to just have a bunch of and leave them attached to your DUTs, which keeps the pin mapping clear and consistent while being able to freely move the LA around.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | GND | local:SolderPoint | J11, J12 |
| 1 | CH1 | local:SolderPoint | J2 |
| 1 | CH2 | local:SolderPoint | J3 |
| 1 | CH3 | local:SolderPoint | J4 |
| 1 | CH4 | local:SolderPoint | J5 |
| 1 | CH5 | local:SolderPoint | J6 |
| 1 | CH6 | local:SolderPoint | J7 |
| 1 | CH7 | local:SolderPoint | J8 |
| 1 | CH8 | local:SolderPoint | J9 |
| 1 | CLK | local:SolderPoint | J10 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
Questions
How big is the Logic breakout PCB?
It measures 17.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Logic breakout use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Logic breakout KiCad files?
From the florolf/electronics-utils repository on GitHub, at the commit this page was made from: the board is logic-breakout/logic-breakout.kicad_pcb and its schematic logic-breakout/logic-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Logic breakout design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from florolf/electronics-utils
2- 2 layers22 × 53 mm
Similar boards
- 2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696