2 layers15.2 × 10.9 mm
D11-nano dbg
flipperdevices/flipperzero-good-faps
Flipper Zero Official Apps maintained by Flipper Team and Friends
13 parts489GPL-3.0
2 layers24.4 × 11.2 mm
Flipper Zero Official Apps maintained by Flipper Team and Friends
- Size
- 24.4 × 11.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 64
- Pads
- 140
- Tracks, vias
- 150, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Jul 2023
- Updated
- 15 Aug 2026
Overview
M484-dap is an open-source printed circuit board by flipperdevices, from the flipperdevices/flipperzero-good-faps repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 24.4 × 11.2 mm with 28 parts on 64 nets, routed with 150 tracks and 33 vias.
It is built around the OT201612MJBA4SL and SC662K-3.3V. Its parts include 9 capacitors, 7 resistors, 3 ICs, 2 connectors and 2 inductors.
Main components
2
OT201612MJBA4SL
SMD2016-4P-40℃~+85℃ 1.8V~3.3V 12MHz 4mA CMOS ±10ppm ±20ppm SMD2016-4P Crystal Oscillators ROHSYXCCrystal Oscillators
SC662K-3.3V
SOT-23-25℃~+85℃ 1 18mV@(80mA)、38mV@(10mA) 250mA 25uA 3.3V 50dB@(1kHz) 6V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSFMVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | ataradov_smd:0603 | C1, C2, C7, C8, C9 |
| 4 | 10K | ataradov_smd:0603 | R4, R5, R6, R7 |
| 3 | 1uF | ataradov_smd:0402 | C4, C5, C6 |
| 2 | 5.1K | ataradov_smd:0603 | R1, R2 |
| 2 | BLM15BD471SN1D | ataradov_smd:0402 | L1, L2 |
| 1 | 100nF | ataradov_smd:0402 | C3 |
| 1 | 200 | ataradov_smd:0402 | R3 |
| 1 | Conn-5x2 | ataradov_conn:Header-5x2-1.27mm | J2 |
| 1 | GND | ataradov_misc:TestPoint-1.27mm-Small | TP3 |
| 1 | Logo | ataradov_misc:Logo-Small | Logo1 |
| 1 | M48XSIDAE | ataradov_ic:TQFP-64-0.4mm | IC2 |
| 1 | OT201612MJBA4SL | ataradov_ic:SMD2016-4P | IC3 |
| 1 | Orange | ataradov_smd:0603 | LED1 |
| 1 | SC662K-3.3 | ataradov_ic:SOT-23 | IC1 |
| 1 | SWCLK | ataradov_misc:TestPoint-1.27mm-Small | TP1 |
| 1 | SWDIO | ataradov_misc:TestPoint-1.27mm-Small | TP2 |
| 1 | USB-C | ataradov_conn:USB-C | J1 |
More from flipperdevices/flipperzero-good-faps
1Similar boards
- 8 layers28.9 × 28.9 mm
OpenAIO Whoop
OpenDrone-hw/OpenAIO-Whoop
Open-source 1S whoop AIO: flight controller, 4-channel brushless ESC, ExpressLRS receiver and analog VTX, 25.5x25.5 mm. Planned.
249 parts13CERN-OHL-S-2.0 - 2 layers17.8 × 43.2 mm
- 2 layers43.4 × 18.8 mm
Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers26.2 × 12.7 mm
- 2 layers16.3 × 39.5 mm
- 2 layers25.4 × 29.3 mm
- 2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k - 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0
Questions
How big is the M484-dap PCB?
It measures 24.4 × 11.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M484-dap use?
28 parts, built around the OT201612MJBA4SL and SC662K-3.3V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M484-dap KiCad files?
From the flipperdevices/flipperzero-good-faps repository on GitHub, at the commit this page was made from: the board is dap_link/lib/free-dap/hardware/m484-dap/m484-dap.kicad_pcb and its schematic dap_link/lib/free-dap/hardware/d11-nano-dbg/d11-nano-dbg.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the M484-dap design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).