

Esp cc dimmer
Waveshare ESP32-C3-Zero based addressable LED driver
- Size
- 68.3 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 17
- Pads
- 82
- Tracks, vias
- 108, 8
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 May 2026
- Updated
- 29 Jul 2026
Overview
Esp cc dimmer is an open-source printed circuit board by flaviut, from the flaviut/hardware repository on GitHub. It is a 2-layer board of 68.3 × 52 mm with 16 parts on 17 nets, routed with 108 tracks and 8 vias.
It is built around the VEML7700-TR, NLDD-1050H and WJ15EDGRC-3.81-02P-14-00A, with the EC11E15244G1 among its other parts. Its parts include 5 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 switch. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4VEML7700-TR
SMD-4P-25℃~+85℃ 120klx 16bit 2.35mm 2.5V~3.6V 3mm 6.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsNLDD-1050H
DIP-9-40℃~+50℃ 1 1.05A 10V~59V 6V~52V Buck PWM Short Circuit Protection、Over Voltage Protection DIP-9 Waterproof LED driver power supply ROHSMWLED DriversWJ15EDGRC-3.81-02P-14-00A
弯插,P=3.81mm-40℃~+105℃ 1 1x2P 2 2P 3.81mm 300V 8A Board Side/Socket - Closed Green Hinged (Snap On) Right-Angle 弯插,P=3.81mm Pluggable System Terminal Block ROHSKANGNEXPluggable System Terminal BlockEC11E15244G1
插件插件 Rotary Encoders ROHSALPSALPINERotary Encoders
README
esp_addressable_leds/README.mdWaveshare ESP32-C3-Zero based addressable LED driver
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | WJ15EDGRC-3.81-02P-14-00A | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J1, J2 |
| 1 | 100u 63V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C8 |
| 1 | 4.7u 100V | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C11 |
| 1 | EC11E15244G1 | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | SW1 |
| 1 | LX8015 | footprints:LX8015 | U4 |
| 1 | NLDD-1050H | footprints:NLDD1050H | PS1 |
| 1 | VEML7700-TR | footprints:VEML7700-TR | U2 |
| 1 | XIAO-ESP32-C3-SMD | footprints:XIAO-ESP32-C3-DIP-SMD | U3 |
More from flaviut/hardware
2- 2 layers100 × 100 mm

- 2 layers60 × 50 mm

Similar boards
- 4 layers32.8 × 36.3 mm

Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System
68 parts57GPL-3.0 - 2 layers81.2 × 71.6 mm

EveningStar
ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.
153 parts4AGPL-3.0 - 4 layers22 × 51.5 mm

ProPrj SPE 10BASE T1L USB adapter
pierrejay/10base-t1l-usb-adapter
Single Pair Ethernet 10BASE-T1L USB adapter (LAN9500A + DP83TD510E)
75 parts2 - 2 layers160 × 100 mm

Relay
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.
61 parts1 - 2 layers150 × 154 mm

Thermo8
mahmoud-elghamry/thermocouple
This directory is a self-contained KiCad 10 project. It does not share files with, and must not be confused with, the single-channel board in hardware/single-channel/.
267 parts1 - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 2 layers80 × 45 mm

- 4 layers90 × 90.1 mm

HaptiCAD base
EmielV2002/HaptiCAD
A PC peripheral based on the smartknob project by scottbez1.
108 parts1Apache-2.0
Questions
How big is the Esp cc dimmer PCB?
It measures 68.3 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp cc dimmer use?
16 parts, built around the VEML7700-TR, NLDD-1050H, WJ15EDGRC-3.81-02P-14-00A and EC11E15244G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp cc dimmer KiCad files?
From the flaviut/hardware repository on GitHub, at the commit this page was made from: the board is esp_cc_dimmer/esp_cc_dimmer.kicad_pcb and its schematic 120V_or_gate/120V_or_gate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp cc dimmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask flaviut before reusing the design.