2 layers390 × 93 mm
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
93 parts960Apache-2.0
2 layers95.3 × 220.3 mm
Calc
flavian112/calc- Size
- 95.3 × 220.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 89
- Pads
- 414
- Tracks, vias
- 431, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Nov 2024
- Updated
- 4 Jan 2025
Overview
Calc is an open-source printed circuit board by flavian112, from the flavian112/calc repository on GitHub. It is a 2-layer board of 95.3 × 220.3 mm with 93 parts on 89 nets, routed with 431 tracks and 57 vias.
Its parts include 40 diodes, 40 switches, 7 capacitors, 3 connectors and 1 resistor. It belongs with the RP2040 boards of this library.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24 |
| 40 | SW_MX | calc:MX2A-E1NW | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +24 |
| 4 | 4u7 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C5, C6, C7 |
| 3 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J1, J2, J3 |
| 1 | 100n | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 470n | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
| 1 | RaspberryPi_Pico_W | Module_RaspberryPi_Pico:RaspberryPi_Pico | A1 |
| 1 | ~ | calc:EADOGM240-7 | U1 |
Questions
How big is the Calc PCB?
It measures 95.3 × 220.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Calc use?
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Calc KiCad files?
From the flavian112/calc repository on GitHub, at the commit this page was made from: the board is hardware/calc/calc.kicad_pcb and its schematic hardware/calc/calc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Calc design in my own project?
Its repository states no licence, so its author keeps all rights: ask flavian112 before reusing the design.
Similar boards
- 2 layers217.6 × 68.1 mm
Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
93 parts202CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers147 × 80 mm
Controller
voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.
93 parts108GPL-3.0 - 2 layers276 × 87.1 mm
- 2 layers30 × 46 mm
- 2 layers145.1 × 107.7 mm
Aurora l
Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.
93 parts64GPL-3.0 - 2 layers
Psoc5power2
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
93 parts59