2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers19 × 32 mm
MKL03Z16VFK4
fitzdoingprojects/kinetis_boardsbreakout boards for cool kinetis chips
- Size
- 19 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 27
- Pads
- 72
- Tracks, vias
- 238, 21
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 18 Oct 2017
- Updated
- 18 Oct 2017
Overview
MKL03Z16VFK4 is an open-source printed circuit board by fitzdoingprojects, from the fitzdoingprojects/kinetis_boards repository on GitHub, published under the MIT licence. It is a 2-layer board of 19 × 32 mm with 12 parts on 27 nets, routed with 238 tracks and 21 vias.
It is built around the MKL03Z16VFK4 and LM1117-3.3. Its parts include 5 connectors, 3 capacitors, 2 resistors and 2 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2
MKL03Z16VFK4
QFN-24-EP(4x4)-40℃~+105℃ 1.71V~3.6V 12bit 16KB 22 2KB 32 Bit 48MHz ARM Cortex-M0+ Built-in FLASH QFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitors_SMD:C_0805 | C1, C3 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2 |
| 2 | JUMPER | Resistors_SMD:R_0402 | R1, R2 |
| 1 | 0.1uF | Capacitors_SMD:C_0402 | C4 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U1 |
| 1 | MKL03Z16VFK4 | parts:QFN-24_EP_4x4_Pitch0.65mm | U2 |
| 1 | PORTA | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J4 |
| 1 | PORTB | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J5 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J3 |
Questions
How big is the MKL03Z16VFK4 PCB?
It measures 19 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MKL03Z16VFK4 use?
12 parts, built around the MKL03Z16VFK4 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MKL03Z16VFK4 KiCad files?
From the fitzdoingprojects/kinetis_boards repository on GitHub, at the commit this page was made from: the board is MKL03Z16VFK4/kicad/MKL03Z16VFK4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MKL03Z16VFK4 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 2 layers275 × 103 mm
- 2 layers43 × 34.3 mm
