FitnessTrackerpuzzle/PCB_LCDDit bevat de hardware van de LCD
TestPCB is an open-source printed circuit board by FitnessTrackerpuzzle, from the FitnessTrackerpuzzle/PCB_LCD repository on GitHub. It is a 2-layer board of 97.7 × 61.4 mm with 21 parts on 61 nets, routed with 230 tracks and 14 vias.
It is built around the ARDUINO UNO R3 and AMS1117-3.3. Its parts include 8 resistors, 4 capacitors and 2 transistors. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R5, R6, R7, R8 |
| 4 | 4.7k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4 |
| 2 | 2N7000 | 2N7002:SOT23-3 | Q1, Q2 |
| 2 | 434111043826 | 434111043826:434111043826 | Boot, Enable |
| 1 | 105017-1001 | 105017-1001:MOLEX_105017-1001 | micro_usb1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | LDOto3v3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | LCD |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | Header |
| 1 | ESP32-WROOM-32E_(16MB) | ESP32-WROOM-32E__16MB_:MODULE_ESP32-WROOM-32E_(16MB) | ESP32 |
It measures 97.7 × 61.4 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ARDUINO UNO R3 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FitnessTrackerpuzzle/PCB_LCD repository on GitHub, at the commit this page was made from: the board is TestPCB/TestPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FitnessTrackerpuzzle before reusing the design.
gk977246/Openmower_Brushed
I have rebuilt a Bosch Indego800. It had no RPMSensor on the mowing motor, so i added magnet and hallsensor myself. It is easily possible, to convert any old mower with brushed motors, to openmower with RTK.
sukeshraom/ESP32-WROOM-32E-development-board
ESP32-WROOM-32E development board in the Arduino UNO form factor with USB Type-C and CH340C USB-to-UART interface. Includes complete KiCad schematic, PCB layout, and manufacturing files.
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.