2 layers
2 layers111 × 99.1 mm
Projet Final GI Equipe2
FishyG/ProjetFinalGIGit pour le projet final en GI. Contient l'activité 1 et 3
- Size
- 111 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 37
- Pads
- 133
- Tracks, vias
- 353, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Nov 2022
- Updated
- 10 May 2023
Overview
Projet Final GI Equipe2 is an open-source printed circuit board by FishyG, from the FishyG/ProjetFinalGI repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 111 × 99.1 mm with 30 parts on 37 nets, routed with 353 tracks and 4 vias.
It is built around the COM-09032 and WS2812B. Its parts include 8 connectors, 6 capacitors, 5 resistors, 4 diodes and 3 ICs.
Main components
2README
README.mdProjetFinalGI
Git pour le projet final en GI. Contient l'activité 1 et 3
https://www.digikey.ca/en/products/detail/sparkfun-electronics/COM-16347/11630204 ws2812b del rgb programmable
Couleurs HTML DELs https://www.w3schools.com/colors/colors_names.asp
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C7 |
| 4 | 1K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R6, R7 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D3, D5, D7 |
| 2 | COM-09032 | COM-09032:XDCR_COM-09032 | U1, U2 |
| 2 | Conn_01x15_Female | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 330 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1 |
| 1 | AZ1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | mcp1droite | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | mcp1gauche | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | mcp2droite | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | mcp2gauche | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
Questions
How big is the Projet Final GI Equipe2 PCB?
It measures 111 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Projet Final GI Equipe2 use?
30 parts, built around the COM-09032 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projet Final GI Equipe2 KiCad files?
From the FishyG/ProjetFinalGI repository on GitHub, at the commit this page was made from: the board is PCB/Projet_Final_GI_Equipe2.kicad_pcb and its schematic PCB/Projet_Final_GI_Equipe2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projet Final GI Equipe2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers98 × 27 mm
BuildGun
ravinrabbid/BuildGun
Drop-in replacement for the electronics of the Satisfactory Build Gun replica.
36 parts1MIT - 2 layers100 × 100 mm
Macropadultra
LimesOrLemons/Macropaduno
An ESP32-S3 handheld controller with a custom PCB and 3D-printed enclosure for numerous programmable functions.
67 parts - 2 layers30 × 100 mm
DroidVR PCB
xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
49 parts1 - 2 layers304.8 × 95.2 mm
LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0 - 2 layers27.3 × 34.3 mm
- 2 layers235.8 × 117.2 mm
- 2 layers130 × 109 mm
Right
Hex-4/glyph
[ a custom split keyboard for portably and comfortably interfacing with computing systems ]
49 parts11MIT