
Sender hub
firstdorsal/led-panels
Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste
Panel receiver is an open-source printed circuit board by firstdorsal, from the firstdorsal/led-panels repository on GitHub. It is a 2-layer board of 60 × 67.5 mm with 19 parts on 43 nets, routed with 98 tracks and 0 vias.
It is built around the 74AHCT125D. Its parts include 5 resistors, 5 connectors, 3 ICs and 2 capacitors. It belongs with the RP2040 boards of this library.
Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste
Lange Seite: abstand löcher 5,5cm Kurze Seite abstand löcher 2,5cm FALSCH IN KICAD
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x03_Pin | Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm | J3, J5 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 74AHCT125 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | Conn_01x04_Pin | Connector_Wire:SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm | J1 |
| 1 | Conn_01x04_Pin | DCDC_Module_55x25mm:DCDC_Module_55x25mm | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | ~ | DCDC_Module_55x25mm:MAX485_Module_41mm | U1 |
The 15 most common of 19 parts.

firstdorsal/led-panels
Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste




byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.

twasilczyk/waterdrop-esphome
Waterdrop RO system smart Wi-Fi module for Home Assistant

usedhondacivic/ECE-4760-POV-Display
Persistence of vision display. 30 FPS, full RGB color, and 26" diameter. Updates remotely over WIFI.

GLGPrograms/tinyDiskII
Homemade floppy disk emulator for Apple II series computers

joshjetson/phosphor
A full fledged DAW in TUI and GUI flavors: Run it in the terminal or run it as a desktop app (Desktop App Coming Soon..maybe)
It measures 60 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the 74AHCT125D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the firstdorsal/led-panels repository on GitHub, at the commit this page was made from: the board is pcb/panel_receiver/panel_receiver/panel_receiver.kicad_pcb and its schematic pcb/panel_receiver/panel_receiver/panel_receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask firstdorsal before reusing the design.