Skip to the content
2 layers60 × 67.5 mmPanel receiver, the printed circuit board in 3D

Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

Size
60 × 67.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
43
Pads
105
Tracks, vias
98, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Mar 2026
Updated
10 Jun 2026

Overview

Panel receiver is an open-source printed circuit board by firstdorsal, from the firstdorsal/led-panels repository on GitHub. It is a 2-layer board of 60 × 67.5 mm with 19 parts on 43 nets, routed with 98 tracks and 0 vias.

It is built around the 74AHCT125D. Its parts include 5 resistors, 5 connectors, 3 ICs and 2 capacitors. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

MAX485 Boards

Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

DC DC

Lange Seite: abstand löcher 5,5cm Kurze Seite abstand löcher 2,5cm FALSCH IN KICAD

FALSCH IN KICAD

  • abstand des dc dc wandlers
  • jede menge silk screen fehlt mit labels usw

WICHTIG ZU BEACHTEN

  • DC DC wandler auf die richtige output spannung tunen vor dem einschalten

Für iteration an diesem Projekt

  • steckerlöcher direkt auf der einen seite des pcb alle anderen komponenten auf der rückseite

Für zukünftige Projekte

  • einseitiges pcb
  • silkscreen und richtige teilbenennung
  • pfeile wo die raspbi header zu löten sind, nicht alle löten
  • schraubklemmen header module
  • mehr und stabilere längere dritte hände
  • richtige abzug über rohr aus dem fenster raus
  • hilfs leds
  • probe stellen für klemmprobes
  • seitentisch und regal für komponenten
  • seitentisch klappbar oder schiebbar
  • besseres werkzeug
  • mehr licht
  • lampen/halterungen generell mit armen zum ziehen
  • kamera overhead für ai behavior prevention und sharing mit agents

Parts

19
QtyValueFootprintReferences
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4
24.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2Conn_01x03_PinConnector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mmJ3, J5
11000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
1100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1
1120Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5
174AHCT125Package_DIP:DIP-14_W7.62mmU3
1Conn_01x04_PinConnector_Wire:SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mmJ1
1Conn_01x04_PinDCDC_Module_55x25mm:DCDC_Module_55x25mmJ2
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU2
1~DCDC_Module_55x25mm:MAX485_Module_41mmU1

The 15 most common of 19 parts.

More from firstdorsal/led-panels

1
  • 2 layers38 × 130 mmSender hub, the printed circuit board in 3D

    Sender hub

    firstdorsal/led-panels

    Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

    16 parts

Similar boards

  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers45 × 54 mmRusty hangulclock, the printed circuit board in 3D

    Rusty hangulclock

    suapapa/HangulClock

    원조 한글시계. (Rust, Go, Arduino 구현)

    15 parts49
  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    merlinkv/Omega_MSX2

    Update of the Omega Home Computer Project

    265 parts40GPL-3.0
  • 2 layers273.8 × 109 mmTrueStrike42, the printed circuit board in 3D

    TrueStrike42

    byungyoonc/TrueStrike42

    TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.

    167 parts24
  • 4 layers65.4 × 53.3 mmWaterdrop esphome, the printed circuit board in 3D

    Waterdrop esphome

    twasilczyk/waterdrop-esphome

    Waterdrop RO system smart Wi-Fi module for Home Assistant

    39 parts15MIT
  • 2 layers345 × 105.6 mmPov display, the printed circuit board in 3D

    Pov display

    usedhondacivic/ECE-4760-POV-Display

    Persistence of vision display. 30 FPS, full RGB color, and 26" diameter. Updates remotely over WIFI.

    50 parts13
  • 2 layers95.3 × 50.8 mmTinyDiskII, the printed circuit board in 3D

    TinyDiskII

    GLGPrograms/tinyDiskII

    Homemade floppy disk emulator for Apple II series computers

    52 parts12GPL-3.0
  • 2 layers296 × 234 mmDeck, the printed circuit board in 3D

    Deck

    joshjetson/phosphor

    A full fledged DAW in TUI and GUI flavors: Run it in the terminal or run it as a desktop app (Desktop App Coming Soon..maybe)

    281 parts12MIT

Questions

How big is the Panel receiver PCB?

It measures 60 × 67.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Panel receiver use?

19 parts, built around the 74AHCT125D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panel receiver KiCad files?

From the firstdorsal/led-panels repository on GitHub, at the commit this page was made from: the board is pcb/panel_receiver/panel_receiver/panel_receiver.kicad_pcb and its schematic pcb/panel_receiver/panel_receiver/panel_receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panel receiver design in my own project?

Its repository states no licence, so its author keeps all rights: ask firstdorsal before reusing the design.