

ICPDriver
a plasma cleaner
- Size
- 62.7 × 67.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 11
- Pads
- 56
- Tracks, vias
- 116, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Aug 2026
- Updated
- 30 Aug 2026
Overview
ICPDriver is an open-source printed circuit board by Firestorm108, from the Firestorm108/purge repository on GitHub. It is a 2-layer board of 62.7 × 67.1 mm with 22 parts on 11 nets, routed with 116 tracks and 4 vias.
It is built around the IPT007N06N(TOKMAS) and FDA18N50. Its parts include 7 capacitors, 4 resistors, 4 connectors, 2 ICs and 1 transistor.
Main components
2README
README.mdpurge
Purge is a fully open source wireless inductively coupled plasma cleaner consisting of three isolated PCBs; the external user-control board, STM32 based motherboard, spark generator/ICP driver, and a vaccum chamber.
PCB & Assembly
The Process
Purge is a specialized type of plasma cleaner. There are zero electrodes in the vacuum chamber, meaning the sterility levels are very high, atomically sterile even. There are three stages to the process.
Stage 1: Chamber Prep
A 4.5 CFM standard vacuum pump evacuates much of the air inside of the glass dome to 37.5 mTorr. This makes the plasma much easier to form, as there is a reduced gas density. The chamber is made up of a custom machined aluminum base and a cheap glass dome you can find on Amazon. There is a slight implosion risk, so it is important you wear proper PPE.Stage 2: Plasma Formation
There are two parts to the plasma formation. Since inductively coupled plasma (ICP) is relatively harder to form than capacitively coupled plasma or direct discharges, simply running the RF through the primary coil may not form the plasma. To form the plasma, we initiate a short high voltage spark with an external device. In this case, I'm using a high frequency solid state plasma flame generator, similar to the ICP circuit itself. It ionizes some of the gas in the chamber, making ICP form much easier. The ICP driver powers on after this, and the chamber fills with plasma.Stage 3: Adjustment & Control
You can change the plasma inside the chamber using the built in STM32 interrupter. It allows you to pulse the plasma at any desired frequency within the chip and MOSFETs limits. This can be useful if you are trying to do research using the device, or wish to adjust power levels based on the item you are sterilizing.Bill of Materials
| Item | Price | Link |
|---|---|---|
| Control PCB | $10 | JLCPCB |
| Header Pins | $3 | AliExpress |
| OLED Screen | $4 | AliExpress |
| 10K Potentiometers | $4 | AliExpress |
| Push Button | $4 | AliExpress |
| 3mm Flat Top LEDs | $2 | AliExpress |
| F-F Jumpers | $2 | AliExpress |
| ICP Driver PCB + Assembly | $55 | JLCPCB |
| FQA18N50 MOSFETs | $10 | AliExpress |
| 6kV 33pF Capacitors | $2 | AliExpress |
| 12AWG Solid Core | $4 | AliExpress |
| Massive Heatsink | $10 | AliExpress |
| HFSSTC Module | $24 | AliExpress |
| 24AWG Solid Core (Inductor Wire) | $7 | Amazon |
| 6AWG Primary Copper | $24 | Amazon |
| Purge Motherboard PCB + Assembly | $80 | JLCPCB |
| 24V → 12V Isolation SMPS | $6 | AliExpress |
| 24V 10A Power Supply | $30 | Amazon |
| JLCPCB Customs & Shipping | $91 | JLCPCB |
| 4" × 7" Glass Dome | $30 | Amazon |
| 4.5 CFM Vacuum Pump | $60 | Amazon |
| Hosing & Gauge | $28 | Amazon |
| SAE to NPT Adapter | $9 | Amazon |
| NPT Tap | $7 | Amazon |
| M5 × 100mm Threaded Rods | $10 | Amazon |
| Silicone Caulk | $3 | Amazon |
| Custom Aluminum Base Plate | $50 | JLC CNC |
| Silicone Isolation Feet | $20 | Amazon |
Total: $589
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 6kV 33pF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mm | C4, C5, C6, C7 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 1K 0.5W | Resistor_SMD:R_2512_6332Metric | R1, R2 |
| 2 | 450V 4.7nF | Capacitor_SMD:C_1812_4532Metric | C2, C3 |
| 2 | Hole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | IPT007N06N | easyeda2kicad:HSOF-8_IPT007N06N | U1, U2 |
| 1 | 10K | easyeda2kicad:RES-ADJ-TH_RK1631110U1Q | RV1 |
| 1 | 10uH | easyeda2kicad:CONN-TH_P10.16_KF135T-10.16-2P | L1 |
| 1 | 1uF 100V | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | FDA18N50 | Package_TO_SOT_THT:TO-247-3_Vertical | Q1 |
| 1 | ICP Primary | easyeda2kicad:CONN-TH_P10.16_KF135T-10.16-2P | J1 |
| 1 | Plasma Flame | easyeda2kicad:CONN-TH_P10.16_KF135T-10.16-2P | J2 |
| 1 | SIG | easyeda2kicad:CONN-TH_P10.16_KF135T-10.16-2P | J5 |
| 1 | VIN | easyeda2kicad:CONN-TH_P10.16_KF135T-10.16-2P | J4 |
More from Firestorm108/purge
2- 2 layers49.8 × 75.8 mm

- 2 layers42.4 × 1.8 mm

Similar boards
- 2 layers117 × 41.8 mm

PCB Files With Parts
eeden2/Toroid-PCB-Design
This is a PCB Design for a circuit pertaining to creating a Plasma Toroid through the Ionization of Noble Gases.
17 parts3 - 2 layers158 × 11 mm

Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0 - 2 layers57 × 65 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm

RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm

BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm

Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm

- 2 layers19.7 × 19.7 mm

Questions
How big is the ICPDriver PCB?
It measures 62.7 × 67.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ICPDriver use?
22 parts, built around the IPT007N06N(TOKMAS) and FDA18N50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICPDriver KiCad files?
From the Firestorm108/purge repository on GitHub, at the commit this page was made from: the board is PCB Source/ICPDriver.kicad_pcb and its schematic PCB Source/ControlPanel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICPDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Firestorm108 before reusing the design.