Skip to the content
2 layers42.4 × 1.8 mmControlPanel, the printed circuit board in 3D

ControlPanel

Firestorm108/purge

a plasma cleaner

Size
42.4 × 1.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
12
Pads
42
Tracks, vias
113, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Aug 2026
Updated
30 Aug 2026

Overview

ControlPanel is an open-source printed circuit board by Firestorm108, from the Firestorm108/purge repository on GitHub. It is a 2-layer board of 42.4 × 1.8 mm with 15 parts on 12 nets, routed with 113 tracks and 0 vias.

It is built around the HS96L03W2C03 and PB-05B-R. Its parts include 5 diodes, 1 IC, 1 connector and 1 switch.

Main components

2

README

README.md

purge

Purge is a fully open source wireless inductively coupled plasma cleaner consisting of three isolated PCBs; the external user-control board, STM32 based motherboard, spark generator/ICP driver, and a vaccum chamber.

PCB & Assembly

Screenshot 2026-08-26 at 1 35 50 PM Screenshot 2026-08-26 at 3 20 42 PM Screenshot 2026-08-26 at 2 14 10 PM Screenshot 2026-08-26 at 3 26 43 PM

The Process

Purge is a specialized type of plasma cleaner. There are zero electrodes in the vacuum chamber, meaning the sterility levels are very high, atomically sterile even. There are three stages to the process.

Stage 1: Chamber Prep

A 4.5 CFM standard vacuum pump evacuates much of the air inside of the glass dome to 37.5 mTorr. This makes the plasma much easier to form, as there is a reduced gas density. The chamber is made up of a custom machined aluminum base and a cheap glass dome you can find on Amazon. There is a slight implosion risk, so it is important you wear proper PPE.

Stage 2: Plasma Formation

There are two parts to the plasma formation. Since inductively coupled plasma (ICP) is relatively harder to form than capacitively coupled plasma or direct discharges, simply running the RF through the primary coil may not form the plasma. To form the plasma, we initiate a short high voltage spark with an external device. In this case, I'm using a high frequency solid state plasma flame generator, similar to the ICP circuit itself. It ionizes some of the gas in the chamber, making ICP form much easier. The ICP driver powers on after this, and the chamber fills with plasma.

Stage 3: Adjustment & Control

You can change the plasma inside the chamber using the built in STM32 interrupter. It allows you to pulse the plasma at any desired frequency within the chip and MOSFETs limits. This can be useful if you are trying to do research using the device, or wish to adjust power levels based on the item you are sterilizing.

Bill of Materials

ItemPriceLink
Control PCB$10JLCPCB
Header Pins$3AliExpress
OLED Screen$4AliExpress
10K Potentiometers$4AliExpress
Push Button$4AliExpress
3mm Flat Top LEDs$2AliExpress
F-F Jumpers$2AliExpress
ICP Driver PCB + Assembly$55JLCPCB
FQA18N50 MOSFETs$10AliExpress
6kV 33pF Capacitors$2AliExpress
12AWG Solid Core$4AliExpress
Massive Heatsink$10AliExpress
HFSSTC Module$24AliExpress
24AWG Solid Core (Inductor Wire)$7Amazon
6AWG Primary Copper$24Amazon
Purge Motherboard PCB + Assembly$80JLCPCB
24V → 12V Isolation SMPS$6AliExpress
24V 10A Power Supply$30Amazon
JLCPCB Customs & Shipping$91JLCPCB
4" × 7" Glass Dome$30Amazon
4.5 CFM Vacuum Pump$60Amazon
Hosing & Gauge$28Amazon
SAE to NPT Adapter$9Amazon
NPT Tap$7Amazon
M5 × 100mm Threaded Rods$10Amazon
Silicone Caulk$3Amazon
Custom Aluminum Base Plate$50JLC CNC
Silicone Isolation Feet$20Amazon

Total: $589

Parts

15
QtyValueFootprintReferences
5LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
210KPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV1, RV2
1Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ4
1HS96L03W2C03easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791U1
1LOGOTestPoint:portalsmallerG***
1PB-05B-Reasyeda2kicad:CONN-TH_PB-05B-RSW2

More from Firestorm108/purge

2
  • 2 layers49.8 × 75.8 mmPurge, the printed circuit board in 3D

    Purge

    Firestorm108/purge

    a plasma cleaner

    76 parts
  • 2 layers62.7 × 67.1 mmICPDriver, the printed circuit board in 3D

    ICPDriver

    Firestorm108/purge

    a plasma cleaner

    22 parts

Similar boards

  • 4 layers51 × 77 mmBODAQS A8 board v1 0, the printed circuit board in 3D

    BODAQS A8 board v1 0

    benconnor1972/BODAQS

    Bicycle Open Data Acquisition System

    120 parts9
  • 2 layers42 × 98.1 mmPendant, the printed circuit board in 3D

    Pendant

    esplo/cue2keys_resources

    Docs and other resources for Cue2Keys

    69 parts5MIT
  • 2 layers108 × 65 mmPcb moonratII, the printed circuit board in 3D

    Pcb moonratII

    PubInv/moonrat

    Moonrat: A second-generation portable incubator

    37 parts5AGPL-3.0
  • 2 layers56.8 × 66.2 mmTamagotchi, the printed circuit board in 3D

    Tamagotchi

    TaniWanKenobi/tamagotchi

    A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!

    14 parts5
  • 2 layers60 × 90 mmCinder, the printed circuit board in 3D

    Cinder

    CircuitGuy943/CinderV2-Filament-Dryer

    (🚧) A filament dryer to precede my old one made inside a wooden box that never worked properly and didn't heat anything. Features to be estabilished

    40 parts4GPL-3.0
  • 4 layers56 × 28 mmBx tacho, the printed circuit board in 3D

    Bx tacho

    dazchi/bx-tacho

    Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.

    51 parts3GPL-3.0
  • 2 layers180 × 110 mmPicotouch grid, the printed circuit board in 3D

    Picotouch grid

    todbot/picotouch_grid

    170 parts2GPL-3.0

Questions

How big is the ControlPanel PCB?

It measures 42.4 × 1.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ControlPanel use?

15 parts, built around the HS96L03W2C03 and PB-05B-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ControlPanel KiCad files?

From the Firestorm108/purge repository on GitHub, at the commit this page was made from: the board is PCB Source/ControlPanel.kicad_pcb and its schematic PCB Source/ControlPanel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ControlPanel design in my own project?

Its repository states no licence, so its author keeps all rights: ask Firestorm108 before reusing the design.