

Iidx pico
- Size
- 180 × 160 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 101
- Nets
- 96
- Pads
- 502
- Tracks, vias
- 765, 142
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Jul 2024
- Updated
- 15 Aug 2024
Overview
Iidx pico is an open-source printed circuit board by FireBite, from the FireBite/iidx_pico_pcb_v2 repository on GitHub. It is a 2-layer board of 180 × 160 mm with 101 parts on 96 nets, routed with 765 tracks and 142 vias.
It is built around the SN74LV1T34DBV, USBLC6-2P6 and PESD3V3S2UT, with the PESD5V2S2UT among its other parts. Its parts include 45 diodes, 20 capacitors, 13 switches, 5 resistors and 5 fuses. It belongs with the RP2040 boards of this library.
Main components
4SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)PESD3V3S2UT
SOT-2318A 2 207pF 20V 2uA 3.3V 330W@8/20us 5.2V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)PESD5V2S2UT
SOT-23120pF 16V 1uA 20A@8/20us 300W@8/20us 5V 8.5V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | WS2812B_Unified | iidx_pico:WS2812B-1615 | D11, D12, D13, D14, D21, D22, D23, D24, D31, D32, D33, D34, D41, D42, D43, D44 +12 |
| 19 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C6, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +3 |
| 11 | WS2812B_Unified | iidx_pico:WS2812B-2835 | D10, D20, D30, D40, D50, D60, D70, DA1, DA2, DA3, DA4 |
| 7 | SWITCH_SPST | iidx_pico:SW_Kailh_Choc_V1V2_IIDX | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 5 | 500mA | Fuse:Fuse_0805_2012Metric | F1, F2, F3, F4, F5 |
| 4 | PESD3V3S2UT | Package_TO_SOT_SMD:SOT-23 | D1, D3, D4, D6 |
| 4 | SWITCH_SPST | iidx_pico:SW_Kailh_Choc_V1V2_1.00u_LED | SW8, SW9, SW10, SW11 |
| 4 | ScrewHole | MountingHole:MountingHole_3.2mm_M3 | SCR1, SCR2, SCR3, SCR4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 62 | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | Conn_01x06_Pin | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1, J2 |
| 2 | PESD5V2S2UT | Package_TO_SOT_SMD:SOT-23 | D2, D5 |
| 2 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 2 | Tact_4pin | iidx_pico:EVQP1K05M | SW12, SW13 |
| 1 | 1Meg | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD | U1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J4 |
Similar boards
- 4 layers149 × 95 mm

- 2 layers75 × 100 mm

Timestamper
tomwimmenhove/timestamper
CPLD VHDL project for precise time stamping of events
115 parts1GPL-3.0 - 4 layers112 × 57 mm

- 2 layers83.6 × 83.2 mm

- 4 layers50.3 × 56.1 mm

- 2 layers233.4 × 280 mm

- 2 layers49 × 39.1 mm

UWBkit minimal
GraniteGobbler/UWBkit
This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)
57 parts - 2 layers80 × 86 mm

Pwm adapter
Th3Link/homeautomation
Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.
60 partsGPL-3.0
Questions
How big is the Iidx pico PCB?
It measures 180 × 160 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Iidx pico use?
101 parts, built around the SN74LV1T34DBV, USBLC6-2P6, PESD3V3S2UT and PESD5V2S2UT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iidx pico KiCad files?
From the FireBite/iidx_pico_pcb_v2 repository on GitHub, at the commit this page was made from: the board is iidx_pico.kicad_pcb and its schematic iidx_pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iidx pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask FireBite before reusing the design.