4 layers150 × 101 mm
Linear actuator
kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:
204 parts73
4 layers
CockTag
FireBite/cockTag-hw4Proudly challenging the well-established Polish tracking tag industry
- Copper layers
- 4
- Thickness
- 1.18 mm
- Parts
- 46
- Nets
- 51
- Pads
- 143
- Tracks, vias
- 206, 67
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Nov 2022
- Updated
- 21 Feb 2023
Overview
CockTag is an open-source printed circuit board by FireBite, from the FireBite/cockTag-hw repository on GitHub. It is a 4-layer board with 46 parts on 51 nets, routed with 206 tracks and 67 vias.
It is built around the KXTJ3-1057 and 2450AT18A100E. Its parts include 15 capacitors, 6 resistors, 2 ICs, 2 diodes and 2 inductors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2README
README.mdcockTag-hw
Proudly challenging the well-established Polish tracking tag industry
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C12, C13 |
| 4 | 12p | Capacitor_SMD:C_0402_1005Metric | C8, C9, C10, C11 |
| 3 | 4k7 | Resistor_SMD:R_0402_1005Metric | R1, R2, R6 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 100p | Capacitor_SMD:C_0402_1005Metric | C4, C15 |
| 2 | 3n9 | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 2450AT18A100E | RF_Antenna:Johanson_2450AT18x100 | AE1 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Buzzer | Buzzer_Beeper:PUIAudio_SMT_0825_S_4_R | BZ1 |
| 1 | CR2032_HOLDER | Library:MY-2032-01 | BT1 |
| 1 | G*** | kibuzzard-6367CE4A | kibuzzard-6367CE4A |
| 1 | G*** | kibuzzard-6367CCCA | kibuzzard-6367CCCA |
| 1 | G*** | kibuzzard-6367CDC3 | kibuzzard-6367CDC3 |
| 1 | G*** | kibuzzard-6367CCAB | kibuzzard-6367CCAB |
| 1 | G*** | kibuzzard-6367CCB8 | kibuzzard-6367CCB8 |
| 1 | G*** | kibuzzard-6367CCBF | kibuzzard-6367CCBF |
| 1 | G*** | kibuzzard-6367D1E2 | kibuzzard-6367D1E2 |
| 1 | G*** | kibuzzard-6367D1D3 | kibuzzard-6367D1D3 |
| 1 | KXTJ3-1057 | Package_LGA:Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4y | U1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2 | H1 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | nRF52832-QFxx | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U2 |
Questions
What parts does the CockTag use?
46 parts, built around the KXTJ3-1057 and 2450AT18A100E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CockTag KiCad files?
From the FireBite/cockTag-hw repository on GitHub, at the commit this page was made from: the board is cockTag.kicad_pcb and its schematic MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CockTag design in my own project?
Its repository states no licence, so its author keeps all rights: ask FireBite before reusing the design.
Similar boards
- 2 layers190 × 75 mm
AVT2022 Badge Final
epremeaux/AVTokyo_2022_Badge
AVTokyo 2022 event badge PCB, firmware and server code.
72 parts9 - 4 layers
Sim7070
onomondo/getting-started
Onomondo Getting Started development kit. Board design files and firmware.
96 parts7 - 2 layers31.3 × 21.3 mm
Esp32 i2c
usnistgov/UAS-6.0-First-Responder-UAS-Wireless-Data-Gatherer-Challenge
UAS 6.0 First Responder UAS Wireless Data Gatherer Challenge
32 parts2 - 2 layers73 × 77.5 mm
Uca dkaiot2-kicad
LEAT-EDGE/ambient-pcb-dkaiot
The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…
184 partsCERN-OHL-P-2.0 - 4 layers54 × 54 mm
Puchi pix card
yacchin1205/puchi-pix
A tiny pixel art display kit powered by STM32G030F6P, with a 96x64 OLED (SSD1331) or TFT display.
371 parts - 2 layers55.8 × 66.5 mm
Tadpoleswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
86 parts114 - 2 layers92.7 × 30 mm
SenseEle PCB Antenna rev2
Appiko/sense_snap_hw
This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.
60 parts2