Skip to the content
2 layers24.3 × 42.1 mmWireless wizard wand, the printed circuit board in 3D

Wireless wizard wand

finnfi/wireless-wizard-wand

Nordic Semiconductor Wireless Wizard Wand (WWW) using nRF52840 with Edge Impulse ML motion recognition.

Size
24.3 × 42.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
38
Pads
72
Tracks, vias
130, 10
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Aug 2024
Updated
7 Sep 2026

Overview

Wireless wizard wand is an open-source printed circuit board by finnfi, from the finnfi/wireless-wizard-wand repository on GitHub. It is a 2-layer board of 24.3 × 42.1 mm with 15 parts on 38 nets, routed with 130 tracks and 10 vias.

It is built around the DA7280-00FVC. Its parts include 6 connectors, 2 capacitors, 2 resistors, 1 IC and 1 switch.

Main components

1

README

README.md

Wireless Wizard Wand 🪄✨

(Original Design by tordnat)

Firmware for the Adafruit Feather nRF52840, with two build modes:

  • Forwarder: streams microphone and IMU samples over Bluetooth for recording.
  • Inference: runs the on-device model, controls lights over Zigbee, and sends Bluetooth telemetry.

The repository root is the Zephyr application. Use nRF Connect SDK 2.3.0 and its matching toolchain; the hardware configuration is in app.overlay.

Build and flash

In an SDK-enabled terminal, from this directory:

powershell
west build -s . -b adafruit_feather_nrf52840 -d build/forwarder -- -DAPP_MODE=forwarder
west build -s . -b adafruit_feather_nrf52840 -d build/inference -- -DAPP_MODE=inference
west flash -d build/forwarder
# Or: west flash -d build/inference

If west build is unavailable because the checkout is outside the SDK's west workspace, run the build command from the SDK workspace with absolute -s and -d paths, or use CMake from the SDK-enabled terminal:

powershell
cmake -S . -B build/forwarder -GNinja -DBOARD=adafruit_feather_nrf52840 -DAPP_MODE=forwarder
cmake --build build/forwarder

Use a separate build directory for each mode. Inference is the default; -DAPP_MODE=main remains an alias for inference. The mode automatically selects config/forwarder.conf or config/inference.conf. Explicit CONF_FILE overrides are supported for custom builds; select a configuration compatible with the chosen mode. Old prj.conf and prj_main.conf paths have moved to config/. Recreate old VS Code build configurations against the root application.

Record data and view telemetry

Run the existing host tools from the repository root so their default data/ directory resolves consistently:

powershell
python -m pip install -r scripts/requirements.txt
python scripts/bluetooth_connector_forwarder.py --device-name WWW --out-dir data
python scripts/bluetooth_connector_app.py --device-name WWW --out-dir data

The first tool records forwarding data; the second displays and records inference telemetry. Their command-line arguments, BLE protocol, and file formats are unchanged. The additional conversion, visualization, and dataset scripts remain in scripts/. Dataset scripts contain recording-specific paths and need review before use; they are not automated tests.

Layout

  • src/forwarder/: forwarding entry point and audio capture/transport.
  • src/inference/: inference entry point, audio DSP, model runtime, and Zigbee.
  • src/shared/: Bluetooth, IMU, and shared headers.
  • nn_models/: model arrays, quantization and DSP constants, verification sample.
  • config/: complete, separate firmware configurations.
  • scripts/: Python capture and analysis tools.
  • data/: ignored local recordings.
  • hardware-files/, references/: hardware designs and reference material.

Parts

15
QtyValueFootprintReferences
24.7kResistor_SMD:R_0805_2012MetricR1, R2
2TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2
10.1uFCapacitor_SMD:C_0805_2012MetricC1
14.7uFCapacitor_SMD:C_0805_2012MetricC2
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ3
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ4
1Conn_01x11_SocketConnector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_VerticalJ2
1Conn_01x16_SocketConnector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_VerticalJ1
1DA7280-00FVCDA7280:QFN65P300X300X84-12NU2
1EVQ-P7A01PEVQ-P7A01P:EVQP7J01PS1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1

More from finnfi/wireless-wizard-wand

2
  • 2 layers11.9 × 8.4 mmMicrophone pcb, the printed circuit board in 3D

    Microphone pcb

    finnfi/wireless-wizard-wand

    Nordic Semiconductor Wireless Wizard Wand (WWW) using nRF52840 with Edge Impulse ML motion recognition.

    4 parts
  • 2 layers9 × 9 mmLed pcb, the printed circuit board in 3D

    Led pcb

    finnfi/wireless-wizard-wand

    Nordic Semiconductor Wireless Wizard Wand (WWW) using nRF52840 with Edge Impulse ML motion recognition.

    2 parts

Similar boards

  • 6 layers74 × 140 mmPocket synth, the printed circuit board in 3D

    Pocket synth

    northernpaws/pocketsequencer

    STM32H743ZI-based pocket-sized sequencer with synth engines and sampler, velocity pads, MPE aftertouch, BLE MIDI, Bluetooth audio, and more.

    385 parts
  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0

Questions

How big is the Wireless wizard wand PCB?

It measures 24.3 × 42.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Wireless wizard wand use?

15 parts, built around the DA7280-00FVC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Wireless wizard wand KiCad files?

From the finnfi/wireless-wizard-wand repository on GitHub, at the commit this page was made from: the board is hardware-files/wireless-wizard-wand-pcb/wireless-wizard-wand.kicad_pcb and its schematic hardware-files/led-pcb/led-pcb/led-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Wireless wizard wand design in my own project?

Its repository states no licence, so its author keeps all rights: ask finnfi before reusing the design.