
Oric Diag
rabs664/Oric-Diagnostics-PCB
A recreation of Mike Brown's excellent Board and Loopback harnesses

Designs and resources for the Finite Aletheia: a versatile, 8-bit hand-bootstrapped computer.
Aletheia is an open-source printed circuit board by finitedevices, from the finitedevices/aletheia repository on GitHub. It is a 12-layer board of 94 × 127 mm with 85 parts on 105 nets, routed with 1,247 tracks and 18 vias.
It is built around the 74LS04PC, 74LS21PC and AS6C1008-55PCN, with the NHD-0420DZ-NSW-BBW, ECS-100AX-010 and G19AP among its other parts. Its parts include 34 switches, 14 resistors, 13 capacitors, 9 ICs and 7 diodes.
Designs and resources for the Finite Aletheia: a versatile, 8-bit hand-bootstrapped computer.
Before building the simulator for the first time, ensure that development dependencies are installed by running:
cd simulator
./build.sh --install-devOnce the dependencies are installed, the Aletheia simulator can be built and run by running the following in the simulator directory:
./build.sh && python3 -m http.serverThe simulator will then be available at localhost:8000.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C205, C206, C207, C208, C209, C210, C211, C212 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R101, R102, R104, R105, R106, R301 |
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R107, R108, R109, R203 |
| 3 | 8×10k | Resistor_THT:R_Array_SIP9 | RN101, RN102, RN103 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C203, C204 |
| 2 | D_Schottky | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D201, D202 |
| 2 | Red LED | LED_THT:LED_D5.0mm | D103, D204 |
| 2 | SW_DIP_x08 | Button_Switch_THT:SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW101, SW102 |
| 1 | 0.1u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C202 |
| 1 | 1.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R302 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R201 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C201 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D101 |
| 1 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R103 |
| 1 | 39k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R202 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C101 |
| 1 | 4090 USB-C | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J201 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U104 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm | U105 |
| 1 | 74LS21 | Package_DIP:DIP-14_W7.62mm | U106 |
| 1 | 9V battery | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J202 |
| 1 | A/!/` | Button_Switch_THT:SW_PUSH_6mm | SW311 |
| 1 | AS6C1008-55PCN | Package_DIP:DIP-32_W15.24mm | U102 |
| 1 | B/,/< | Button_Switch_THT:SW_PUSH_6mm | SW326 |
| 1 | BKSP/DEL | Button_Switch_THT:SW_PUSH_6mm | SW320 |
| 1 | C/'/@ | Button_Switch_THT:SW_PUSH_6mm | SW324 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J101 |
| 1 | D/$/CH5 | Button_Switch_THT:SW_PUSH_6mm | SW313 |
| 1 | E/3/CH1 | Button_Switch_THT:SW_PUSH_6mm | SW303 |
| 1 | ECS-100AX-010 | Components:ECS-100AX-010 | Y101 |
| 1 | F/%/CH6 | Button_Switch_THT:SW_PUSH_6mm | SW314 |
| 1 | G/^/CH7 | Button_Switch_THT:SW_PUSH_6mm | SW315 |
| 1 | G19AP | Components:G19AP | SW105 |
| 1 | Green LED | LED_THT:LED_D5.0mm | D102 |
| 1 | H/&/{ | Button_Switch_THT:SW_PUSH_6mm | SW316 |
| 1 | I/8/+ | Button_Switch_THT:SW_PUSH_6mm | SW308 |
| 1 | J/*/} | Button_Switch_THT:SW_PUSH_6mm | SW317 |
| 1 | K/(/[ | Button_Switch_THT:SW_PUSH_6mm | SW318 |
| 1 | L/)/] | Button_Switch_THT:SW_PUSH_6mm | SW319 |
| 1 | LOGO | Components:Badge | G*** |
| 1 | LP2954AIT/NOPB | Package_TO_SOT_THT:TO-220-3_Vertical | U201 |
| 1 | M///? | Button_Switch_THT:SW_PUSH_6mm | SW328 |
| 1 | MCP23S17_SP | Package_DIP:DIP-28_W7.62mm | U301 |
| 1 | N/./> | Button_Switch_THT:SW_PUSH_6mm | SW327 |
| 1 | NHD-0420DZ-NSW-BBW | Components:NHD-0420DZ-FL-YBW | U302 |
| 1 | O/9/= | Button_Switch_THT:SW_PUSH_6mm | SW309 |
| 1 | P/0 | Button_Switch_THT:SW_PUSH_6mm | SW310 |
| 1 | Q/1/STOP | Button_Switch_THT:SW_PUSH_6mm | SW301 |
| 1 | R/4/CH2 | Button_Switch_THT:SW_PUSH_6mm | SW304 |
| 1 | S/"/CH4 | Button_Switch_THT:SW_PUSH_6mm | SW312 |
| 1 | SHIFT | Button_Switch_THT:SW_PUSH_6mm | SW321 |
| 1 | SPC/ENT | Button_Switch_THT:SW_PUSH_6mm | SW330 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW104 |
| 1 | SYM | Button_Switch_THT:SW_PUSH_6mm | SW329 |
| 1 | T/5/CH3 | Button_Switch_THT:SW_PUSH_6mm | SW305 |
| 1 | U/7/- | Button_Switch_THT:SW_PUSH_6mm | SW307 |
| 1 | V/#/~ | Button_Switch_THT:SW_PUSH_6mm | SW325 |
| 1 | W/2/CH0 | Button_Switch_THT:SW_PUSH_6mm | SW302 |
| 1 | W65C02S6TPG-14 | Package_DIP:DIP-40_W15.24mm_LongPads | U101 |
| 1 | W65C22N6TPG-14 | Package_DIP:DIP-40_W15.24mm | U103 |
| 1 | X/;/: | Button_Switch_THT:SW_PUSH_6mm | SW323 |
| 1 | Y/6/_ | Button_Switch_THT:SW_PUSH_6mm | SW306 |
| 1 | Yellow LED | LED_THT:LED_D5.0mm | D104 |
| 1 | Z/\/| | Button_Switch_THT:SW_PUSH_6mm | SW322 |

rabs664/Oric-Diagnostics-PCB
A recreation of Mike Brown's excellent Board and Loopback harnesses

danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts




mggates39/68hc11_SBC
Building a Single Board Computer around the MC68HC11. It will include my first attempt with KiCad designing a PCB

schlae/AmdekDVM
Reverse engineering Amdek DVM video card for the Apple II

Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
It measures 94 × 127 mm and has 12 copper layers, 1.6 mm thick.
85 parts, built around the 74LS04PC, 74LS21PC, AS6C1008-55PCN and NHD-0420DZ-NSW-BBW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the finitedevices/aletheia repository on GitHub, at the commit this page was made from: the board is hardware/Aletheia.kicad_pcb and its schematic hardware/Aletheia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask finitedevices before reusing the design.