2 layers80 × 40 mm
2 layers
ControlTemp
fernandorasta99/PROYECTO-FINALLos puntos a destacar son: Realizar una placa de circuito impreso con los módulos que se utilizarán en el proyecto, para ello, es libre de realizar el diseño como mejor le convenga Puede utilizar cualquier software de…
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 41
- Pads
- 65
- Tracks, vias
- 110, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Oct 2020
- Updated
- 21 Oct 2020
Overview
ControlTemp is an open-source printed circuit board by fernandorasta99, from the fernandorasta99/PROYECTO-FINAL repository on GitHub. It is a 2-layer board with 9 parts on 41 nets, routed with 110 tracks and 0 vias.
It is built around the PIC16F887-I/PT and DHT11. Its parts include 3 connectors, 2 resistors, 2 ICs, 1 diode and 1 switch. It belongs with the PIC boards of this library.
Main components
2
PIC16F887-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 14KB 20MHz 256Byte 2V~5.5V 35 368Byte 8 Bit Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | IR EMISOR | LED_THT:LED_D3.0mm_IRBlack | D1 |
| 1 | PIC16F887-IP | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
| 1 | RF Receptor | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | RF Transmisor | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
What parts does the ControlTemp use?
9 parts, built around the PIC16F887-I/PT and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ControlTemp KiCad files?
From the fernandorasta99/PROYECTO-FINAL repository on GitHub, at the commit this page was made from: the board is Proyecto Final/ControlTemp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ControlTemp design in my own project?
Its repository states no licence, so its author keeps all rights: ask fernandorasta99 before reusing the design.
Similar boards
- 2 layers100 × 100 mm
- 2 layers96.5 × 99.1 mm
- 2 layers558.8 × 88.9 mm
- 2 layers77.4 × 65.2 mm
- 2 layers170 × 55 mm
Protector de Tesoro
edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.
88 parts - 2 layers53 × 55.5 mm
RFID Siralama Karti
emrebrbr/RFID-Door-System-with-PIC16F887
Smart security door PIC16F887 based RFID (RC522) solution.
12 partsMIT - 2 layers160 × 100 mm
