

Timer Circuit
The Barbies team project
- Size
- 55.9 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 33
- Pads
- 69
- Tracks, vias
- 87, 53
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jan 2026
- Updated
- 22 May 2026
Overview
Timer Circuit is an open-source printed circuit board by felixUOB, from the felixUOB/Two_Defuse_Or_Not_Two_Defuse repository on GitHub. It is a 2-layer board of 55.9 × 71.1 mm with 12 parts on 33 nets, routed with 87 tracks and 53 vias.
It is built around the SN74HC595NE4 and TDCR1060M. Its parts include 8 resistors, 2 ICs and 1 connector.
Main components
2README
README.mdTwo Defuse or Not Two Defuse
Created by The Barbies | COMS30043 2025 Team Project
This project aims to create an innovative and tense cooperative experience for players by utilising custom hardware.
The application runs on an asymmetric two-input system: one player operates within the Unity game world created for the project, while the other operates a custom physical hardware controller to communicate and defuse the bomb.
Technical report on the project can be found here (May require downloading due to file size).
Watch the technical video and trailer here.
Project Setup
To fully experience this project, a physical 'hardware bomb' controller is required.
Prerequisites
- Microcontroller: Teensy 4.1
- IDE: Visual Studio Code with the PlatformIO extension
- Game Engine: Unity 6.3 LTS
1. Hardware Setup
- Clone this git repository to your local machine.
- Open the
Hardware/ControllerV0.1folder in Visual Studio Code. - Ensure the PlatformIO extension is installed and active.
- Plug the Teensy 4.1 microcontroller into your PC via USB.
- Press the PlatformIO Upload button (the right-pointing arrow in the bottom status bar) and wait for the upload to finish.
2. Software (Unity) Setup
- Open the
Team_Projectfolder in the Unity Editor and import any required packages. - Build the project using Build Profiles, selecting your target operating system.
- Connect the flashed hardware controller to any open serial USB port on your device.
- Launch the built executable.
- Enjoy and try not to explode!
Note: If you do not have the required custom hardware, the level will still open and assign a Mock API. However, the game will not be playable, as the physical interactions required to navigate and access the game states will be absent.
Project Structure
├── Games Project Pitch Design Documents.pdf
├── Hardware
│ ├── Circuit_Designs
│ ├── ControllerV0.1
│ ├── Example Code
│ └── Manufacturing Drawings
├── Hardware-Software_Interaction.md
├── README.md
├── Team_Project (Unity Project Root)
│ ├── Assets
│ ├── Packages
│ ├── ProjectSettings
│ └── ... (Builds and project files)
└── The Barbies - Team Project Pitches.pdfParts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R_Small | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | SN74HC595NE4 | SamacSys_Parts:DIP794W53P254L1930H508Q16N | IC3, IC4 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | TDCR1060M | SamacSys_Parts:DIPS1016W50P254L4020H725Q16N | DS1 |
More from felixUOB/Two_Defuse_Or_Not_Two_Defuse
3- 2 layers86.4 × 96.5 mm

- 2 layers81.3 × 106.7 mm

- 2 layers

Similar boards
- 4 layers88.3 × 54.6 mm

1005-Flash Programmer
wilsondr9999/1005-Flash-Programmer
Flash Programmer for SST39 Flash ROMs
36 parts2AGPL-3.0 - 2 layers71 × 73 mm

Alarm
bbokser/persuasive_waker
An open source hardware alarm clock that can't be snoozed or turned off.
71 parts3MIT - 2 layers85.5 × 53.5 mm

- 4 layers160 × 185.5 mm

- 2 layers60 × 46.5 mm

- 2 layers102 × 45 mm

Chess clock pcb
vekkuli/chess_clock
This repo contains design and fabrication files for my DIY chess clock project. The main components in the design are
16 partsMIT - 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

Questions
How big is the Timer Circuit PCB?
It measures 55.9 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Timer Circuit use?
12 parts, built around the SN74HC595NE4 and TDCR1060M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Timer Circuit KiCad files?
From the felixUOB/Two_Defuse_Or_Not_Two_Defuse repository on GitHub, at the commit this page was made from: the board is Hardware/Circuit_Designs/Timer-Circuit/Timer-Circuit.kicad_pcb and its schematic Hardware/Circuit_Designs/Buttons-Circuit/Buttons-Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Timer Circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask felixUOB before reusing the design.