
Marble sequencer control tracks circuits 2
felicien-brochu/midi_marble_sequencer
A MIDI sequencer using marbles.

A MIDI sequencer using marbles.
Marble sequencer circuits is an open-source printed circuit board by felicien-brochu, from the felicien-brochu/midi_marble_sequencer repository on GitHub. It is a 2-layer board of 290 × 51.6 mm with 59 parts on 26 nets, routed with 379 tracks and 0 vias.
It is built around the QRE1113GR and BD235. Its parts include 32 resistors, 17 ICs, 3 connectors and 1 transistor. It belongs with the audio and music boards of this library.
MIDI Marble Sequencer is a hardware + firmware project that detects marbles on IR sensor tracks and outputs MIDI over USB. The system is split into a main ESP-IDF firmware (sequencer + USB MIDI) and ESP32-based control boards (Arduino/PlatformIO) connected over I2C.
hardware/ — CAD (SolidWorks parts/assemblies) and related manufacturing files.software/
midi_marble_sequencer_main/ — main firmware (ESP-IDF) for the sequencer + USB MIDI.midi_marble_sequencer_controls_main/ — main control board firmware (PlatformIO/Arduino).midi_marble_sequencer_controls_pages/ — pages control board firmware (PlatformIO/Arduino).common_src/ — shared code used by the control board firmwares.smab_midi_mapper/ — JUCE utility app (see its README).stats/ — calibration/statistics data exports.| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | R | sequencer:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_BIG_PADS | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 16 | QRE1113GR | sequencer:QRE1113GR | U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16, U17 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | BD235 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | HP4067_16_ch_analog_mutiplexer_devboard | sequencer:HP4067_16_ch_analog_mutiplexer_devboard | U1 |
The 53 most common of 59 parts.

felicien-brochu/midi_marble_sequencer
A MIDI sequencer using marbles.

felicien-brochu/midi_marble_sequencer
A MIDI sequencer using marbles.

felicien-brochu/midi_marble_sequencer
A MIDI sequencer using marbles.

felicien-brochu/midi_marble_sequencer
A MIDI sequencer using marbles.



fwachsmuth/Synkino
Allows sound playback synchronised to a running,jittery Super 8 projector

opulo-inc/lumenpnp-archive
This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp


alientanya/line-follower-PCB
A modular PCB platform for Fast Line Follower (FLF) robots, designed to prioritize sensor experimentation and component flexibility.

class-ab/open-soccer
Mindstormers' open soccer repo. contains code, pcbs, elec, diagrams, etc...

falconecorp/BOBBY
Robot triatlón : seguidor de linea , quita obstáculos, sumo. Este proyecto esta construido por el técnico físico Lautaro Lammers, el doctor en sistemas Lucas Chavez, el Ingeniero en informatico Dante Canale, El…
It measures 290 × 51.6 mm and has 2 copper layers, 1.6 mm thick.
59 parts, built around the QRE1113GR and BD235. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the felicien-brochu/midi_marble_sequencer repository on GitHub, at the commit this page was made from: the board is hardware/pcb/pcb_ir_sensors/marble_sequencer_circuits.kicad_pcb and its schematic hardware/pcb/pcb_controls_channel_select/MIDI_marble_sequencer_controls_channel_select.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask felicien-brochu before reusing the design.