

2K BWS
Neudesign des Mikrocomputers M.Kramer
- Size
- 170.2 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 144
- Pads
- 608
- Tracks, vias
- 2,271, 437
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2022
- Updated
- 5 Feb 2023
Overview
2K BWS is an open-source printed circuit board by felge1966, from the felge1966/Y23vo repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 170.2 × 94 mm with 48 parts on 144 nets, routed with 2,271 tracks and 437 vias.
It is built around the 74LS193P-E, 74LS04PC and 74LS20P-E, with the 74LS257PC, 74LS74PC and 74LS02PC among its other parts. Its parts include 24 ICs, 11 capacitors, 5 connectors, 3 resistors and 2 diodes.
Main components
774LS193P-E
DIP-1674LS Programmable divide ratio、Reset function、Cascade counter、Synchronous counting、Multi-mode counting DIP-16 Counters, Dividers ROHSRenesas ElectronicsCounters, Dividers74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS20P-E
DIP-14-20℃~+75℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400mV、500mV 400uA 74LS 800mV 8mA NAND Gate DIP-14 Logic Gates ROHSRenesas ElectronicsLogic Gates74LS257PC
DIP-160℃~+70℃ 12mA 2.6mA 24mA 27ns@5V,150pF 4.75V~5.25V 74LS Output enable high-impedance、Tri-state output DIP-16 Signal Switches, Multiplexers, DecodersTexas InstrumentsSignal Switches, Multiplexers, Decoders74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LS30PC
PDIP-140℃~+70℃ 1 1.1mA 18ns@5V,50pF、20ns@5V,50pF 2.7V 2V 4.75V~5.25V 400uA 500mV 74LS Series 8 800mV 8mA NAND Gate PDIP-14 Logic GatesTexas InstrumentsLogic Gates
README
README.mdY23vo
Neudesign des Mikrocomputers M.Kramer
Bisher sind folgende Baugruppen realisiert:
- CPU mit RAM und EPROM
- BWS mit 2K Zeichengenerator
- Floppycontroller mit u8272 (nach FA 07/1990)
- Grafikdisplaycontroller mit U82720 (nach FA 07/1990)
- 2PIO
- SIO mit U856, U857 und 8251
- Backplane mit 8 Steckplätzen
Alle Baugruppen können mit EFS 29 (A-B oder A-C) Steckverbindern oder alternativ mit DIN 41612 C 2*32 bestückt werden.
Bei CPU, 2PIO und SIO sind GALs als Decoder in Verwendung. Die Erstellung erfoolgte mit WinCUPL. Die Sourcen liegen im Verzeichnis
Die Verzeichnisse Redesign 2020 und Redesign 2022 stammen von der Nachetwicklung im Robotrontechnik-Forum. -> ferrytale
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0,1µ | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C5, C6, C7, C8, C9, C10, C11 |
| 5 | 74LS193 | Package_DIP:DIP-16_W7.62mm_LongPads | U16, U22, U32, U41, U51 |
| 4 | 74LS95 | Package_DIP:DIP-14_W7.62mm_LongPads | U12, U13, U15, U24 |
| 3 | 470pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C4 |
| 3 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 1N4148 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1, D2 |
| 2 | 74LS04 | Package_DIP:DIP-14_W7.62mm_LongPads | U11, U43 |
| 2 | 74LS08 | Package_DIP:DIP-14_W7.62mm_LongPads | U1, U42 |
| 2 | 74LS20 | Package_DIP:DIP-14_W7.62mm_LongPads | U33, U52 |
| 2 | 74LS257 | Package_DIP:DIP-16_W7.62mm_LongPads | U30, U40 |
| 2 | 74LS74 | Package_DIP:DIP-14_W7.62mm_LongPads | U23, U53 |
| 2 | Conn_Coaxial | Libs:chinch | J1, J2 |
| 1 | 10500KHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1µ | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C3 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 6116LA45DB | Package_DIP:DIP-24_W15.24mm_LongPads | IC21 |
| 1 | 74LS02 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | 74LS30 | Package_DIP:DIP-14_W7.62mm_LongPads | U20 |
| 1 | DS8286D | Package_DIP:DIP-20_W7.62mm_LongPads | U10 |
| 1 | G2RL-2-ASI-DC5 | Relay_THT:Relay_DPDT_Omron_G2RL | RL1 |
| 1 | K1520_2x29-AC | K1520:K1520_EFS2x29_DIN_male | X1 |
| 1 | U2716 | Package_DIP:DIP-24_W15.24mm_LongPads | U14 |
More from felge1966/Y23vo
5- 2 layers170.2 × 96.5 mm

- 2 layers170.2 × 96.5 mm

- 2 layers170.2 × 95.2 mm

- 2 layers170.2 × 96.5 mm

- 2 layers170.2 × 96.5 mm

Similar boards
- 2 layers630 × 300 mm

- 2 layers476.5 × 299.5 mm

- 2 layers450 × 160 mm

- 2 layers426 × 307 mm

I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts - 2 layers103.6 × 74.9 mm

- 4 layers243.8 × 170.2 mm

- 2 layers364 × 203 mm

- 4 layers304.8 × 215.9 mm

64 256KB SYSTEM BOARD
kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
197 parts4
Questions
How big is the 2K BWS PCB?
It measures 170.2 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2K BWS use?
48 parts, built around the 74LS193P-E, 74LS04PC, 74LS20P-E and 74LS257PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2K BWS KiCad files?
From the felge1966/Y23vo repository on GitHub, at the commit this page was made from: the board is BWS/2K-BWS/2K-BWS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2K BWS design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).