2 layers192.7 × 104.5 mm
Delay
MatthewATaylor/Modular-Synth-Hardware
KiCad schematics and PCB layouts for my modular synth
186 parts11MIT
2 layers83.1 × 85.1 mm
LongShot 5
FandSonthesizer/LongShot_Delay- Size
- 83.1 × 85.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 87
- Pads
- 294
- Tracks, vias
- 1,732, 80
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Dec 2020
- Updated
- 20 Dec 2020
Overview
LongShot 5 is an open-source printed circuit board by FandSonthesizer, from the FandSonthesizer/LongShot_Delay repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83.1 × 85.1 mm with 115 parts on 87 nets, routed with 1,732 tracks and 80 vias.
It is built around the PT2399. Its parts include 54 resistors, 35 capacitors, 8 connectors, 7 transistors and 5 ICs.
Main components
1README
README.mdLongShot_Delay
This is the evolution of our wire-head delay pedal. Here we add a wobble effect top simulate a worn tape drive, where the motors and belts are quite old.
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | NilsLib:Kondensator_Keramik | C1, C3, C4, C10, C12, C15, C18, C21, C26, C33 |
| 10 | 1M | NilsLib:Widerstand_liegend | R6, R12, R18, R21, R22, R23, R29, R37, R40, R53 |
| 8 | 10k | NilsLib:Widerstand_liegend | R2, R3, R9, R26, R27, R39, R44, R50 |
| 8 | 1k | NilsLib:Widerstand_liegend | R1, R4, R7, R20, R24, R30, R31, R43 |
| 6 | 150n | NilsLib:Kondensator_Keramik | C5, C6, C19, C20, C22, C29 |
| 5 | 100k | NilsLib:Widerstand_liegend | R17, R19, R35, R36, R42 |
| 5 | 20k | NilsLib:Widerstand_liegend | R5, R8, R11, R13, R14 |
| 4 | 1N4148 | NilsLib:Diode_Horizontal | D1, D2, D3, D4 |
| 3 | 10u | NilsLib:Elko_D6.3mm_P2.50mm | C23, C28, C30 |
| 3 | 22k | NilsLib:Widerstand_liegend | R48, R52, R54 |
| 3 | 2n5457 | NilsLib:TO-92_Wide_NIK | Q2, Q3, Q4 |
| 3 | 33k | NilsLib:Widerstand_liegend | R41, R49, R51 |
| 3 | 47n | NilsLib:Kondensator_Keramik | C7, C14, C16 |
| 2 | 10 | NilsLib:Widerstand_liegend | R10, R32 |
| 2 | 220k | NilsLib:Widerstand_liegend | R33, R34 |
| 2 | 2N3904 | NilsLib:TO-92_Wide_NIK | Q5, Q7 |
| 2 | 470 | NilsLib:Widerstand_liegend | R46, R47 |
| 2 | 47u | NilsLib:Elko_D6.3mm_P2.50mm | C2, C31 |
| 2 | 560p | NilsLib:Kondensator_Keramik | C11, C17 |
| 2 | BC549 | NilsLib:TO-92_Wide_NIK | Q1, Q6 |
| 2 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3, U5 |
| 1 | 100k | NilsLib:Trimmer_Vertical | T1 |
| 1 | 100p | NilsLib:Kondensator_Keramik | C35 |
| 1 | 100u | NilsLib:Elko_D6.3mm_P2.50mm | C13 |
| 1 | 150k | NilsLib:Widerstand_liegend | R38 |
| 1 | 1u | NilsLib:Elko_D6.3mm_P2.50mm | C8 |
| 1 | 22u | NilsLib:Elko_D6.3mm_P2.50mm | C24 |
| 1 | 30k | NilsLib:Widerstand_liegend | R28 |
| 1 | 33u | NilsLib:Elko_D6.3mm_P2.50mm | C25 |
| 1 | 4,7k | NilsLib:Widerstand_liegend | R15 |
| 1 | 4,7u | NilsLib:Elko_D6.3mm_P2.50mm | C34 |
| 1 | 470u | NilsLib:Elko_D6.3mm_P2.50mm | C27 |
| 1 | 47k | NilsLib:Widerstand_liegend | R16 |
| 1 | 5,6k | NilsLib:Widerstand_liegend | R45 |
| 1 | 5,6n | NilsLib:Kondensator_Keramik | C9 |
| 1 | 50k | NilsLib:Trimmer_Vertical | T2 |
| 1 | 68n | NilsLib:Kondensator_Keramik | C32 |
| 1 | 9,1k | NilsLib:Widerstand_liegend | R25 |
| 1 | AgeSw | NilsLib:PinHeader_1x04_P2.54mm_Vertical_NIK | J6 |
| 1 | AudioIn | NilsLib:Stift | J1 |
| 1 | BYPassSW | NilsLib:Stift_0x3 | J2 |
| 1 | BlendMix | NilsLib:PinHeader_1x06_P2.54mm_Vertical_NIK | J7 |
| 1 | Conn_01x04_Male | NilsLib:PinHeader_1x04_P2.54mm_Vertical_NIK | J4 |
| 1 | Feedback | NilsLib:Stift_x02 | J8 |
| 1 | L78L05_TO92 | NilsLib:TO-92_Wide_NIK | U4 |
| 1 | LFO | NilsLib:PinHeader_1x08_P2.54mm_Vertical_Nik | J5 |
| 1 | PT2399 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | Power | NilsLib:Stift_x02 | J3 |
| 1 | Vactrol | NilsLib:Vactrol | U1 |
Questions
How big is the LongShot 5 PCB?
It measures 83.1 × 85.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LongShot 5 use?
115 parts, built around the PT2399. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LongShot 5 KiCad files?
From the FandSonthesizer/LongShot_Delay repository on GitHub, at the commit this page was made from: the board is LongShot_5/LongShot_5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LongShot 5 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers161.3 × 263.9 mm
DSP 1.1
Owen-Patrick/SoftSynthetics-DSP
Hardware for adapting Karaoke DSP board to eurorack
115 parts10 - 2 layers49.2 × 65.2 mm
- 2 layers127 × 128.5 mm
Dolphins
apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware
208 parts5 - 2 layers61 × 114.9 mm
BoyInWell
CuriousMotor/MoonRock-Delay-Pedal
A PCB for simple PT2399 based delay effect guitar pedal based on Boy In Well.
63 parts3GPL-3.0 - 2 layers86.4 × 58.4 mm
HackableDelay
benjiaomodular/HackableDelay
A hackable delay circuit for eurorack modular synthesizers, designed in KiCad.
65 parts2 - 2 layers50 × 100 mm
- 2 layers100 × 100 mm
KicadJE ADSR Mega32
promesoft/KicadJE_ADSR_Mega32
Envelope for ATMEGA32A - Formant VCO - PT2399 Reverb
217 parts2MIT