Skip to the content
2 layers40 × 30 mmPic programmer, the printed circuit board in 3D

A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

Size
40 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
2
Pads
4
Tracks, vias
2, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Oct 2026
Updated
6 Nov 2026

Overview

Pic programmer is an open-source printed circuit board by faisalm7, from the faisalm7/KiCad-Autorouter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 30 mm with 4 parts on 2 nets, routed with 2 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

KiCad-Autorouter

A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates. Constrained automatic placement is a core next feature; an optional copilot proposes settings through the same guarded tools. See the architecture and reuse decision.

No version is a qualified release. Runtime076 now demonstrates one installed selected-placement → protected-routing → reviewed separate-project delivery workflow. The KiCad-launched controls support saved presets, alternatives and coordinate edits, actual Native validation, Edge previews, explicit accept/reject, cancellation and stale-result refusal. Placement currently supports only narrow front/unrotated circular-PTH translation tasks; ordinary SMD/library footprints, grouping and broader constraints remain open. Placement workflow and limits.

The prior074/075 routing milestones and all failures remain versioned evidence, not repeated or relabelled results. Genuine changed-warning GUI interaction, exact queued-opening timing and a live model endpoint remain untested. Ordinary controls work without AI. Current state · Requirements and remaining gates.

Start here · CLI · Installation · Graphical workflow · Preferences · Platforms.

Current finite-workflow installation: '.runs/runtime076 fresh install 001', build b7e3b3b33c7f79cbef7056a2ceaca224f8e60bc4, manifest 4524a95a486786494a99a3e93a34e5d43d1df0a59b7a107549dd2ae6ae6a3494. It uses isolated KiCad 10.0.7 arm64 on macOS 27.0.1 and pinned existing dependencies. Same-Mac/account testing is not independent or standalone installation. Normal routing needs no network, Git or research archive. Original code and owned fixtures are GPL-3.0-or-later; reused MIT placement modules retain their notice and other third-party material keeps its separate rights.

General completion superiority over corrected and tuned/restart Freerouting remains unmet/deferred research. It is not a prerequisite for advancing the design assistant; task completion, preserved intent, understandable changes and predictable runtime are the product criteria. 060 and 062 retain all populations, failures and costs. Corrected-standard/B1 remains the default; optional Improve preserves a verified incumbent and a 40-second internal return reserve. Shorter ground copper alone does not establish electrical fitness or less cleanup. The 074 ArcDice CLI delivery met its original 600-second envelope at 556.86 wall seconds and 512.24 CPU seconds, including a conservative debit for the retained pre-Native launch failure. Its 26 warnings, five ignored checks and all 29 internal trials, including four thermal rejections, remain visible. This is one exposed delivery/headroom result, not a routing-quality comparison.

Save and close source editors before routing. Inspect every warning and ignored check. The owner’s qualification previews use Microsoft Edge; the distributed workflow keeps the browser configurable. Accept records intent; fresh export validates a separate project. Sources are never overwritten, live application/undo is unavailable, and routing acceptance is not whole-project, electrical or manufacturing approval.

Windows016 demonstrated only a narrow isolation-entry/lifecycle check, not Windows routing or installation. Independent installation, current full recovery, human cleanup/review and physical validation remain open. The 076 compact increment exactly restored 1,249 selected evidence files and retired its temporary workspace; prior archives remain dependencies. Later source changes are outside that cutoff. Backups are on this Mac and do not protect against disk failure. No formal release, package, external contact or physical test is claimed.

Parts

4
QtyValueFootprintReferences
1Owned_CONCAVEOwned_CONCAVECONCAVE
1Owned_CONVEXOwned_CONVEXCONVEX
1Owned_FOREIGN_AOwned_FOREIGN_AFOREIGN_A
1Owned_FOREIGN_BOwned_FOREIGN_BFOREIGN_B

More from faisalm7/KiCad-Autorouter

12
  • 2 layers26 × 24 mmPre refill, the printed circuit board in 3D

    Pre refill

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    8 partsGPL-3.0
  • 2 layers26 × 24 mmTask.alias after, the printed circuit board in 3D

    Task.alias after

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    8 partsGPL-3.0
  • 2 layers24 × 29 mmPositive--candidate--owned net tie contact, the printed circuit board in 3D

    Positive--candidate--owned net tie contact

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    7 partsGPL-3.0
  • 2 layers20 × 16 mmOwned1007-fields, the printed circuit board in 3D

    Owned1007-fields

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers26 × 24 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 4 layers26 × 24 mmPour before refill, the printed circuit board in 3D

    Pour before refill

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers40 × 30 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers26 × 24 mmPre refill, the printed circuit board in 3D

    Pre refill

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers43 × 35 mmOwned hierarchy native, the printed circuit board in 3D

    Owned hierarchy native

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    5 partsGPL-3.0
  • 2 layers20 × 16 mmFixture, the printed circuit board in 3D

    Fixture

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0
  • 2 layers40 × 30 mmPic programmer, the printed circuit board in 3D

    Pic programmer

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0
  • 2 layers40 × 30 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Pic programmer PCB?

It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pic programmer use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pic programmer KiCad files?

From the faisalm7/KiCad-Autorouter repository on GitHub, at the commit this page was made from: the board is evidence/pic-custom-controls-source-001/author/preparation-001/front0-false_hull/pic_programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pic programmer design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).