Skip to the content
2 layers26 × 24 mmPre refill, the printed circuit board in 3D

A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

Size
26 × 24 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
3
Pads
6
Tracks, vias
4, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Oct 2026
Updated
6 Nov 2026

Overview

Pre refill is an open-source printed circuit board by faisalm7, from the faisalm7/KiCad-Autorouter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26 × 24 mm with 8 parts on 3 nets, routed with 4 tracks and 0 vias.

README

README.md

KiCad-Autorouter

A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates. Constrained automatic placement is a core next feature; an optional copilot proposes settings through the same guarded tools. See the architecture and reuse decision.

No version is a qualified release. Runtime076 now demonstrates one installed selected-placement → protected-routing → reviewed separate-project delivery workflow. The KiCad-launched controls support saved presets, alternatives and coordinate edits, actual Native validation, Edge previews, explicit accept/reject, cancellation and stale-result refusal. Placement currently supports only narrow front/unrotated circular-PTH translation tasks; ordinary SMD/library footprints, grouping and broader constraints remain open. Placement workflow and limits.

The prior074/075 routing milestones and all failures remain versioned evidence, not repeated or relabelled results. Genuine changed-warning GUI interaction, exact queued-opening timing and a live model endpoint remain untested. Ordinary controls work without AI. Current state · Requirements and remaining gates.

Start here · CLI · Installation · Graphical workflow · Preferences · Platforms.

Current finite-workflow installation: '.runs/runtime076 fresh install 001', build b7e3b3b33c7f79cbef7056a2ceaca224f8e60bc4, manifest 4524a95a486786494a99a3e93a34e5d43d1df0a59b7a107549dd2ae6ae6a3494. It uses isolated KiCad 10.0.7 arm64 on macOS 27.0.1 and pinned existing dependencies. Same-Mac/account testing is not independent or standalone installation. Normal routing needs no network, Git or research archive. Original code and owned fixtures are GPL-3.0-or-later; reused MIT placement modules retain their notice and other third-party material keeps its separate rights.

General completion superiority over corrected and tuned/restart Freerouting remains unmet/deferred research. It is not a prerequisite for advancing the design assistant; task completion, preserved intent, understandable changes and predictable runtime are the product criteria. 060 and 062 retain all populations, failures and costs. Corrected-standard/B1 remains the default; optional Improve preserves a verified incumbent and a 40-second internal return reserve. Shorter ground copper alone does not establish electrical fitness or less cleanup. The 074 ArcDice CLI delivery met its original 600-second envelope at 556.86 wall seconds and 512.24 CPU seconds, including a conservative debit for the retained pre-Native launch failure. Its 26 warnings, five ignored checks and all 29 internal trials, including four thermal rejections, remain visible. This is one exposed delivery/headroom result, not a routing-quality comparison.

Save and close source editors before routing. Inspect every warning and ignored check. The owner’s qualification previews use Microsoft Edge; the distributed workflow keeps the browser configurable. Accept records intent; fresh export validates a separate project. Sources are never overwritten, live application/undo is unavailable, and routing acceptance is not whole-project, electrical or manufacturing approval.

Windows016 demonstrated only a narrow isolation-entry/lifecycle check, not Windows routing or installation. Independent installation, current full recovery, human cleanup/review and physical validation remain open. The 076 compact increment exactly restored 1,249 selected evidence files and retired its temporary workspace; prior archives remain dependencies. Later source changes are outside that cutoff. Backups are on this Mac and do not protect against disk failure. No formal release, package, external contact or physical test is claimed.

Parts

8
QtyValueFootprintReferences
6owned1007_transport_terminalowned1007_transport_terminalJ1, J2, J3, J4, J5, J6
2OWNED_ARTWORKOwnedDuplicateArtworkG***, G***

More from faisalm7/KiCad-Autorouter

12
  • 2 layers26 × 24 mmTask.alias after, the printed circuit board in 3D

    Task.alias after

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    8 partsGPL-3.0
  • 2 layers24 × 29 mmPositive--candidate--owned net tie contact, the printed circuit board in 3D

    Positive--candidate--owned net tie contact

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    7 partsGPL-3.0
  • 2 layers20 × 16 mmOwned1007-fields, the printed circuit board in 3D

    Owned1007-fields

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers26 × 24 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 4 layers26 × 24 mmPour before refill, the printed circuit board in 3D

    Pour before refill

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers40 × 30 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers26 × 24 mmPre refill, the printed circuit board in 3D

    Pre refill

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    6 partsGPL-3.0
  • 2 layers43 × 35 mmOwned hierarchy native, the printed circuit board in 3D

    Owned hierarchy native

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    5 partsGPL-3.0
  • 2 layers20 × 16 mmFixture, the printed circuit board in 3D

    Fixture

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0
  • 2 layers40 × 30 mmPic programmer, the printed circuit board in 3D

    Pic programmer

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0
  • 2 layers40 × 30 mmPic programmer, the printed circuit board in 3D

    Pic programmer

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0
  • 2 layers40 × 30 mmImported, the printed circuit board in 3D

    Imported

    faisalm7/KiCad-Autorouter

    A local open-source KiCad design assistant under development, built around Freerouting. Routing works without an AI account, preserves original constraints and protected copper, and validates separate candidates.

    4 partsGPL-3.0

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Pre refill PCB?

It measures 26 × 24 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pre refill use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pre refill KiCad files?

From the faisalm7/KiCad-Autorouter repository on GitHub, at the commit this page was made from: the board is evidence/gui-runtime009-060-native-opening-001-notes/route-stage-records/pre-refill.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pre refill design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).