
BallBearingBoard241112
faecorrigan/Open-Source-3-axis-CNC-Touch-Probe
This is a 3 axis cnc probe, principle development is done for the Makera Carvera

This is a 3 axis cnc probe, principle development is done for the Makera Carvera
BallBearingBoardPanelization241112 is an open-source printed circuit board by faecorrigan, from the faecorrigan/Open-Source-3-axis-CNC-Touch-Probe repository on GitHub. It is a 2-layer board of 106.3 × 70 mm with 187 parts on 10 nets, routed with 72 tracks and 0 vias.
It is built around the BAS4002ARPPE6327HTSA1. Its parts include 48 connectors, 24 capacitors and 16 ICs.
This is a 3 axis cnc probe, principle development is done for the Makera Carvera
Features: wireless communication between the probe and host via raw 802.15.4 packets OTA firmware configuration and updates wireless charging of on board lipo battery
The current development prototype in software uses the Arduino IDE with a seedstudio XIAO nrf52840 Final hardware will be a custom nrf52840 circuit.
the project currently is using public libraries from: https://github.com/Tjoms99/xiao_sense_nrf52840_battery_lib
| Qty | Value | Footprint | References |
|---|---|---|---|
| 71 | , , , , , , , , , , , , , , , +55 | ||
| 48 | Conn_01x01_Pin | TouchProbeLibrary2:0.0625 ball bearing mouting pad | J1, J1, J2, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21 +32 |
| 16 | 10nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C6, C7, C8, C11, C12, C13, C14, C17, C18, C19, C20, C23, C24 |
| 8 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C9, C10, C15, C16, C21, C22 |
| 8 | BAS4002ARPPE6327HTSA1 | TouchProbeLibrary2:SOT143_BAS4002ARPPE6327HTSA1_INF | U1, U3, U5, U7, U9, U11, U13, U15 |
| 8 | MCP1799T-5002H/TT | TouchProbeLibrary2:SOT-23_TT_MCH | U2, U4, U6, U8, U10, U12, U14, U16 |
| 8 | XUNPU_FPC-05F-6PH20_JLCPCB_C2856796 | TouchProbeLibrary2:Jushuo AFH34-S06FIA-1H FPC C5139821 | FPC1, FPC2, FPC3, FPC4, FPC5, FPC6, FPC7, FPC8 |
The 167 most common of 187 parts.

faecorrigan/Open-Source-3-axis-CNC-Touch-Probe
This is a 3 axis cnc probe, principle development is done for the Makera Carvera

faecorrigan/Open-Source-3-axis-CNC-Touch-Probe
This is a 3 axis cnc probe, principle development is done for the Makera Carvera

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!





kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome


girishji/keychron-optical-keyboard
Keyboard PCB in KiCad using Keychron low-profile optical switches
It measures 106.3 × 70 mm and has 2 copper layers, 1.6 mm thick.
187 parts, built around the BAS4002ARPPE6327HTSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the faecorrigan/Open-Source-3-axis-CNC-Touch-Probe repository on GitHub, at the commit this page was made from: the board is Hardware/Circuit Boards/BallBearingBoardPanelization/ballBearingBoardPanelization241112.kicad_pcb and its schematic Hardware/Circuit Boards/BallBearingBoardPanelization/ballBearingBoardPanelization241112.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask faecorrigan before reusing the design.