

Ttp223 breakout
gameboy_camera_flash
- Size
- 7.7 × 7.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 5
- Pads
- 13
- Tracks, vias
- 28, 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Jun 2023
- Updated
- 11 Jun 2023
Overview
Ttp223 breakout is an open-source printed circuit board by facelesstech, from the facelesstech/gameboy_camera_flash repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 7.7 × 7.7 mm with 5 parts on 5 nets, routed with 28 tracks and 1 via.
It is built around the TTP223-TD. Its parts include 3 ICs and 1 capacitor. It belongs with the retro computing and games and interfaces and adapters boards of this library.
Main components
1README
README.mdgameboy_camera_flash
gameboy_camera_flash
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | battery_custom | battery_connector_custom:vcc_gnd_2pin_custom_thin | U1, U2 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | TestPoint | custom_connectors:1mm_test_point | TP1 |
| 1 | ttp-223 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
More from facelesstech/gameboy_camera_flash
1- 2 layers6.3 × 19.5 mm

Similar boards
- 2 layers50.5 × 128.5 mm

- 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 2 layers226.6 × 74.2 mm

- 2 layers61 × 37.1 mm

Touch button tester
TimGoll/pcb_touch_test
For an upcoming project I wanted to test how to implement PCB touch pads. The easiest solution that I could find was to use the TTP223 IC. All in all the design was pretty easy and straightforward.
21 parts1 - 2 layers20.6 × 28 mm

- 2 layers

- 2 layers59.5 × 27 mm

Desk lamp cc2530
Czubixx/zigbee-desk-lamp
DIY Zigbee desk lamp based on CC2530 controllable smart light for workbench/desk use.
28 parts - 4 layers33 × 31.9 mm

Touch sensor light
gabeak2/Touch_Sensor_Lamp
A small PCB with a capacitive touch sensor IC and 2 1W LEDs. I use them to embed in 3d-printed lithophane lamps, see
24 parts
Questions
How big is the Ttp223 breakout PCB?
It measures 7.7 × 7.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ttp223 breakout use?
5 parts, built around the TTP223-TD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ttp223 breakout KiCad files?
From the facelesstech/gameboy_camera_flash repository on GitHub, at the commit this page was made from: the board is ttp223_kicad6_files/ttp223_breakout.kicad_pcb and its schematic led_ring_kicad6_files/gameboy_camera_flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ttp223 breakout design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).