Skip to the content
2 layers40.3 × 106 mmHagiwoDualVCARev2, the printed circuit board in 3D

HagiwoDualVCARev2

fablabnk/HagiwoDualVCA2

using decoupling caps specified in this verified build: https://github.com/Testbild-synth/HAGIWO055dualvca Hagiwo uses 47uF and 1uF decoupling caps plus extra 1uF on TL074 rails Verified build uses 10uF and 100n

Size
40.3 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
45
Pads
168
Tracks, vias
336, 29
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Jul 2024
Updated
1 Dec 2024

Overview

HagiwoDualVCARev2 is an open-source printed circuit board by fablabnk, from the fablabnk/HagiwoDualVCA repository on GitHub. It is a 2-layer board of 40.3 × 106 mm with 50 parts on 45 nets, routed with 336 tracks and 29 vias.

It is built around the V2164M. Its parts include 19 resistors, 12 capacitors, 6 connectors and 2 ICs.

Main components

1

README

README.md

ToDo

  • Add branding/info

  • Double check schematic one more time

  • DONE: Drill out holes under jacks and don't route traces through them

  • power stripe check

  • pass DRC fully

  • Double check VCA chip pinout is correct

  • Does it matter than the sleeve in pin 2 not 3?

  • Chose to simplify decoupling cap choices to one set of 1uF caps - if I don't have specified caps then go with verified caps below

  • 100pF = 101 disc cap - have it

  • 1uF = 105 disc cap - have it

  • 470pF = 471 disc cap - have it

Key points

  • Both designs are 8HP
  • V2164 can be replaced with SSI2164, SSM2164, or AS2164. (I think, unverified)
  • Needs calibration

Decoupling caps

using decoupling caps specified in this verified build: https://github.com/Testbild-synth/HAGIWO_055_dual_vca Hagiwo uses 47uF and 1uF decoupling caps plus extra 1uF on TL074 rails Verified build uses 10uF and 100n

Parts

50
QtyValueFootprintReferences
610kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R5, R6, R15, R16
4100pFCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC1, C2, C5, C6
410k LINLibrary:Pot_9mm_DShaft_RemovedPins4_5RV1, RV5, RV9, RV10
41uFCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC9, C10, C11, C12
4470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR13, R14, R17, R18
2150kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR11, R12
22.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9, R10
222kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R8
233kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R7
2470pFCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC3, C4
247uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC7, C8
250k LINLibrary:Pot_9mm_DShaft_RemovedPins4_5RV2, RV6
1100k LIN 1Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV3
1100k LIN 2Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV7
110K LIN 1Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV4
110K LIN 2Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV8
17.5kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR19
1CV 1Library:EighthInch_PJ398SM_3mmNPTHJ1
1CV 2Library:EighthInch_PJ398SM_3mmNPTHJ2
1Eurorack_Power_10pin_UnshroudedLibrary:IDC-Header_2x05_P2.54mm_Vertical_Euro_Power_Striped_ThickerTextPWR1
1IN 1Library:EighthInch_PJ398SM_3mmNPTHJ3
1IN 2Library:EighthInch_PJ398SM_3mmNPTHJ4
1OUT 1Library:EighthInch_PJ398SM_3mmNPTHJ5
1OUT 2Library:EighthInch_PJ398SM_3mmNPTHJ6
1TL074Package_DIP:DIP-14_W7.62mm_SocketU2
1V2164MPackage_DIP:DIP-16_W7.62mm_SocketU1

Similar boards

  • 2 layers80.8 × 110 mmCsfilter, the printed circuit board in 3D

    Csfilter

    Alloyed/KitsBlips

    read-only mirror

    45 parts2MIT
  • 2 layers187.2 × 26.6 mmBlade12, the printed circuit board in 3D

    Blade12

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    50 parts3.7k
  • 2 layers45.7 × 25.9 mmAccessory, the printed circuit board in 3D

    Accessory

    usbarmory/usbarmory

    USB armory - The open source compact secure computer

    50 parts1.5k
  • 2 layers21 × 31.5 mmK1-aioc, the printed circuit board in 3D

    K1-aioc

    skuep/AIOC

    Ham Radio All-in-one-Cable

    50 parts1.4kMIT
  • 2 layers42 × 32.5 mmLipoboard, the printed circuit board in 3D

    Lipoboard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    50 parts915
  • 2 layers101 × 31.5 mmManagement, the printed circuit board in 3D

    Management

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    50 parts397Apache-2.0
  • 2 layers123.9 × 94.4 mmRoba R, the printed circuit board in 3D

    Roba R

    kumamuk-git/roBa

    50 parts363GPL-3.0

Questions

How big is the HagiwoDualVCARev2 PCB?

It measures 40.3 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HagiwoDualVCARev2 use?

50 parts, built around the V2164M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HagiwoDualVCARev2 KiCad files?

From the fablabnk/HagiwoDualVCA repository on GitHub, at the commit this page was made from: the board is HagiwoDualVCARev2.kicad_pcb and its schematic HagiwoDualVCARev2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HagiwoDualVCARev2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask fablabnk before reusing the design.