
Haxophone001
cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Recreation of the open-sourced Erica Polivoks Envelope Generator v2.2: https://github.com/erica-synths/diy-eurorack
EricaPolivoksEG is an open-source printed circuit board by fablabnk, from the fablabnk/EricaPolivoksEG repository on GitHub. It is a 2-layer board of 40.3 × 106 mm with 92 parts on 52 nets, routed with 843 tracks and 120 vias.
Its parts include 51 resistors, 14 diodes, 9 transistors, 7 capacitors and 5 connectors. It belongs with the audio and music boards of this library.
TODO: check which DPDT footprint and remove "not verified" from layout - waiting on component DONE: fully double check schematic against original DONE: check IDC power pins & keying - stripe should be to -12V rail DONE: check inverting (-) and non-inverting inputs (+) on TL074 in schematic by comparing to pinout DONE: redo BOM - check we have 2.7k resistor! No, just 2.9K DONE: are jacks switched/normalled? Yes pin 3 is engaged instead of pin 2 when the jack in unplugged DONE: do not mix NPN (2N3904) and PNP (2N3906) DONE: check diameter of radial caps DONE: removed TP labels from schematic, can only presume they are useless! DONE: removed pro power features: polyfuses, reverse polarity protection and inductors DONE: LED orientation check DONE: replaced R38 with 2,7k resistor. When 2.2 used and EG OUT is connected to certain VCAs, the looping may stop
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R5, R6, R10, R12, R15, R21, R24, R26, R27, R38, R39, R47, R48 |
| 12 | 1N4148 | Library:D_DO-35_SOD27_P7.62mm_Horizontal_Widened_No_K | D1, D2, D3, D4, D5, D6, D7, D8, D12, D13, D14, D15 |
| 6 | 2N3904 | Library:TO-92L_Inline_Wider | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 10k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R4, R8, R16, R28, R33 |
| 4 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C3, C5, C6 |
| 3 | 1M A | Library:Pot_9mm_DShaft_RemovedPins4_5 | RV1, RV2, RV3 |
| 3 | 200 | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R1, R2, R3 |
| 3 | 20k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R11, R13, R22 |
| 3 | 2N3906 | Library:TO-92L_Inline_Wider | Q7, Q8, Q9 |
| 3 | 470 | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R37, R41, R44 |
| 3 | 47k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R29, R42, R50 |
| 2 | 2.7k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R17, R31 |
| 2 | 3.3k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R40, R46 |
| 2 | 33k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R35, R36 |
| 2 | 47uFx25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C4 |
| 2 | 5.1k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R14, R23 |
| 2 | 560k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R7, R49 |
| 2 | 56k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R30, R51 |
| 2 | LED | PCM_4ms_LED:LED_3mm_C1A2 | D11, D18 |
| 1 | 1.8k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R32 |
| 1 | 100k A | Library:Pot_9mm_DShaft_RemovedPins4_5 | RV4 |
| 1 | 150k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R20 |
| 1 | 15k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R18 |
| 1 | 1M | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R25 |
| 1 | 220k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R43 |
| 1 | 22k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R45 |
| 1 | 39k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R9 |
| 1 | 4.7uFx16V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7 |
| 1 | 470k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R19 |
| 1 | EG OUT | Library:EighthInch_PJ398SM_3mmNPTH | J5 |
| 1 | Eurorack_Power_10pin_Unshrouded | Library:IDC-Header_2x05_P2.54mm_Vertical_Euro_Power_Striped_ThickerText | J3 |
| 1 | GATE DELAY OUT | Library:EighthInch_PJ398SM_3mmNPTH | J4 |
| 1 | GATE IN | Library:EighthInch_PJ398SM_3mmNPTH | J1 |
| 1 | INV EG OUT | Library:EighthInch_PJ398SM_3mmNPTH | J2 |
| 1 | NU 39k | Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_Widened | R34 |
| 1 | SW_DPDT_x2 | Library:Switch_Toggle_DPDT_MS202 | SW1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |

cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
It measures 40.3 × 106 mm and has 2 copper layers, 1.6 mm thick.
92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fablabnk/EricaPolivoksEG repository on GitHub, at the commit this page was made from: the board is Erica_Polivoks_EG.kicad_pcb and its schematic Erica_Polivoks_EG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fablabnk before reusing the design.