2 layers32.6 × 100 mm
Tuermodul Front
fablabnbg/Innentueren
Schaltplan und Layout für Leseeinheiten und Türmodule des Zugangssystems für die Innentüren
51 parts
2 layers160 × 100 mm
Tuermodul
fablabnbg/InnentuerenSchaltplan und Layout für Leseeinheiten und Türmodule des Zugangssystems für die Innentüren
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 102
- Pads
- 419
- Tracks, vias
- 1,214, 183
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2019
- Updated
- 30 Nov 2023
Overview
Tuermodul is an open-source printed circuit board by fablabnbg, from the fablabnbg/Innentueren repository on GitHub. It is a 2-layer board of 160 × 100 mm with 123 parts on 102 nets, routed with 1,214 tracks and 183 vias.
It is built around the 74HC595, 93LC46B/P and FT4232HL. Its parts include 49 resistors, 21 capacitors, 14 diodes, 12 transistors and 8 fuses.
Main components
3
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
93LC46B/P
PDIP-80℃~+70℃ 1Kbit 2.5V~5.5V 2MHz 6ms SPI PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
FT4232HL
QFP64Quad High Speed USB to Multipurpose UART/MPSSE ICFTDIUncategorised
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R120, R121, R122, R123, R206, R207, R208, R214, R215, R216, R217, R220, R221, R223, R225 +1 |
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C103, C108, C110, C111, C112, C113, C114, C115, C116, C117, C118, C119, C120, C121 |
| 10 | 1N4148 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D205, D206, D207, D208, D209, D210, D211, D212, D213, D214 |
| 8 | 33R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R104, R105, R107, R108, R110, R111, R113, R114 |
| 8 | Q_NPN_CBE | Package_TO_SOT_THT:TO-92_HandSolder | Q205, Q206, Q207, Q208, Q213, Q214, Q215, Q216 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R103, R115, R117, R119, R205 |
| 4 | 0.5A | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F205, F206, F207, F208 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R106, R109, R112, R118 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R209, R210, R211, R212 |
| 4 | 1A | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F201, F202, F203, F204 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D201, D202, D203, D204 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R201, R202, R203, R204 |
| 4 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J202, J203, J204, J205 |
| 4 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q209, Q210, Q211, Q212 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R218, R224, R228 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R213, R219 |
| 2 | 1u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C101, C102 |
| 2 | 27p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C104, C105 |
| 2 | 4u7 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C107, C109 |
| 2 | 4x10k | Resistor_THT:R_Array_SIP5 | RN201, RN202 |
| 2 | 600R/0.5A | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L101, L102 |
| 1 | 12MHz | Crystal:Crystal_HC18-U_Vertical | Y101 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R102 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R116 |
| 1 | 3u3 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C106 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U102 |
| 1 | 93LC46B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U101 |
| 1 | Conn_02x16_Counter_Clockwise | DIN41612_Connectors_custom:DIN41612_D_32pol_90deg | J101 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J201 |
| 1 | FT4232H | Package_QFP:LQFP-64_10x10mm_P0.5mm | U103 |
| 1 | LOGO | FLN_logo:fln_logo | G101 |
| 1 | LOGO | OSH_logo:OSH_logo | G102 |
| 1 | MCP1825S | Package_TO_SOT_THT:TO-220-3_Vertical | U104 |
The 121 most common of 123 parts.
More from fablabnbg/Innentueren
2- 2 layers160 × 100 mm
Raspi Innentueren
fablabnbg/Innentueren
Schaltplan und Layout für Leseeinheiten und Türmodule des Zugangssystems für die Innentüren
41 parts
Similar boards
- 2 layers50 × 50 mm
Quad serial
jamesfowkes/quad-serial-breakout
A quad USB-to-serial breakout board based on the FT4232 IC
53 parts15 - 2 layers100 × 73.2 mm
Ml dev board
coon42/magic-lantern-dev-kit
A dev kit for connection and communication with the service port of Canon EOS cameras.
56 parts8 - 4 layers60 × 74 mm
Namiashi
takarakasai/misa-usb-rs485-hub
4ch isolated USB-to-RS-485 hub board for humanoid robot motor control. FT4232HL + 2× ADM2582E + 2× CA-IS3098W, 5kV isolation, 920kbps-12Mbps, KiCad 10 / JLCPCB manufactured / verified working.
109 parts - 2 layers55 × 80 mm
Ftdi quad lin
trnila/ftdi_quad_lin
FTDI Quad-LIN is an FTDI-based board that enables communication with up to 4 LIN channels.
157 parts - 2 layers83.2 × 57.8 mm
- 4 layers125 × 85 mm
Motherboard
morzack/ece592-nfc-caravan-pcbs
Design files for breakout and motherboard PCBs for Sky130 NFC chip designed in NCSU's Tapeout Course (spr2025)
194 parts1 - 2 layers91.3 × 53.3 mm
- 4 layers89 × 61 mm
Spartan6Dev
jonthomasson/SpartanMini
A flexible, simple, yet powerful FPGA development board.
186 parts17
Questions
How big is the Tuermodul PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tuermodul use?
123 parts, built around the 74HC595, 93LC46B/P and FT4232HL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tuermodul KiCad files?
From the fablabnbg/Innentueren repository on GitHub, at the commit this page was made from: the board is CAD/Tuermodul/Tuermodul.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tuermodul design in my own project?
Its repository states no licence, so its author keeps all rights: ask fablabnbg before reusing the design.