Skip to the content
2 layers88.3 × 73 mmPanel, the printed circuit board in 3D

Enclosures for Smart Citizen

Size
88.3 × 73 mm
Copper layers
2
Thickness
1.6 mm
Parts
630
Nets
36
Pads
900
Tracks, vias
108, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Dec 2016
Updated
14 May 2026

Overview

Panel is an open-source printed circuit board by fablabbcn, from the fablabbcn/smartcitizen-enclosures repository on GitHub. It is a 2-layer board of 88.3 × 73 mm with 630 parts on 36 nets, routed with 108 tracks and 0 vias.

Its parts include 36 ICs, 36 connectors and 18 switches.

README

README.md

Smart Citizen Cases

Smart Citizen Enclosures

DOI

This is a repository we host enclosures we are developing for the Smart Citizen Kit 1.5 and 2.X family. If you are looking for outdoor cases for the SmartCitizen Kit or Stations, make sure to visit the variants table to find out what best suits your needs. If you are looking for Water Kits or Stations, check this table

Warning

Please, beware that this is always a work in progress archive. Sometimes documentation might be missing. Open an issue if you need!

Contribute

License

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Credits

  • Content under folder SmartCitizen Case V1.5.1 has received funding from the European Union's Horizon 2020 research and innovation program under the grant agreement No. 688620

  • Content under folder the other folders has received funding from the European Union's Horizon 2020 research and innovation program under the grant agreement No. 689954

Parts

630
QtyValueFootprintReferences
18Conn_02x03_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical_SMDJ2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +2
18Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +2
18MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1 +2
18SW_SPSTButton_Switch_SMD:SW_SPST_TL3342SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1 +2
18fablablogos:fablabU1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +2
18sclogos:smartcitizenU2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 +2

The 108 most common of 630 parts.

More from fablabbcn/smartcitizen-enclosures

5
  • 2 layers39.2 × 34.3 mmPower routing, the printed circuit board in 3D

    Power routing

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    13 parts19
  • 2 layers89.5 × 50 mmPowerSupply, the printed circuit board in 3D

    PowerSupply

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    11 parts19
  • 2 layers28.1 × 10.5 mmSc reset small k6, the printed circuit board in 3D

    Sc reset small k6

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    6 parts19
  • 2 layers96 × 18 mmI2c bus carriers x5, the printed circuit board in 3D

    I2c bus carriers x5

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    6 parts19
  • 2 layers25.3 × 56.7 mmTentacleShield, the printed circuit board in 3D

    TentacleShield

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    4 parts19

Similar boards

  • 2 layers145.5 × 174.5 mmHippanel, the printed circuit board in 3D

    Hippanel

    sneurlax/hip-badge

    And join our matrix discussion channel: https://matrix.to/#/#hipbadge:matrix.org

    630 parts1
  • 2 layers162 × 147 mmPanelized, the printed circuit board in 3D

    Panelized

    algnor/qc3-bc

    Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware

    626 partsGPL-3.0
  • 2 layers35.8 × 77 mmUconsole expansion card template 1.27, the printed circuit board in 3D

    Uconsole expansion card template 1.27

    crossplatformdev/uConsole-Universal-Expansion-Board

    Breakout board for designing ClockWorkPi uConsole expansion boards

    634 parts23
  • 2 layers257.8 × 176.8 mmTeensy boardV 1, the printed circuit board in 3D

    Teensy boardV 1

    Cosys-Lab/TruggySense

    Framework for off-road rc-vehicle monitorring

    625 parts1CC-BY-SA-4.0
  • 2 layers100 × 18.7 mmWorkshop 6, the printed circuit board in 3D

    Workshop 6

    Tessavana/Soft-interfaces-files

    Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

    624 partsApache-2.0
  • 2 layers94 × 96 mmESP01 WLED pannel, the printed circuit board in 3D

    ESP01 WLED pannel

    8-Lambda-8/ESP01_wled_breakout

    ESP01_wled_breakout

    624 parts

Questions

How big is the Panel PCB?

It measures 88.3 × 73 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Panel use?

630 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panel KiCad files?

From the fablabbcn/smartcitizen-enclosures repository on GitHub, at the commit this page was made from: the board is docs/Power Options/Reset button/sc_reset_k6/panel.kicad_pcb and its schematic docs/Water/Electronics/SmartCitizen Water Station/Isolated Carriers Station/CarrierBoardBus/i2c_bus_carriers_x5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panel design in my own project?

Its repository states no licence, so its author keeps all rights: ask fablabbcn before reusing the design.