Skip to the content
2 layers200 × 199.5 mmSantas Microfactory - Scoring and Health, the printed circuit board in 3D

Santas Microfactory - Scoring and Health

SharKingStudios/Santas-Microfactory

A factory game built entirely out of diode transistor logic.

Size
200 × 199.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
634
Nets
320
Pads
1,511
Tracks, vias
3,108, 72
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Jan 2026
Updated
3 Nov 2026

Overview

Santas Microfactory - Scoring and Health is an open-source printed circuit board by SharKingStudios, from the SharKingStudios/Santas-Microfactory repository on GitHub, published under the MIT licence. It is a 2-layer board of 200 × 199.5 mm with 634 parts on 320 nets, routed with 3,108 tracks and 72 vias.

Its parts include 313 diodes, 233 resistors, 81 transistors and 3 connectors.

README

README.md

Santas Microfactory

A factory game built entirely out of diode transistor logic.

Parts

634
QtyValueFootprintReferences
313DDiode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUpD1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +297
23310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR1, R10, R11, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112 +217
81NPNPackage_TO_SOT_THT:TO-92L_InlineQ1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +65
4LOGOLOGOG***, G***, G***, G***
1Bus_PCI_Express_x16Connector_PCBEdge:BUS_PCIexpress_x16J4
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ3
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_HorizontalJ2

More from SharKingStudios/Santas-Microfactory

5

Similar boards

  • 2 layers35.8 × 77 mmUconsole expansion card template 1.27, the printed circuit board in 3D

    Uconsole expansion card template 1.27

    crossplatformdev/uConsole-Universal-Expansion-Board

    Breakout board for designing ClockWorkPi uConsole expansion boards

    634 parts23
  • 2 layers145.5 × 174.5 mmHippanel, the printed circuit board in 3D

    Hippanel

    sneurlax/hip-badge

    And join our matrix discussion channel: https://matrix.to/#/#hipbadge:matrix.org

    630 parts1
  • 2 layers88.3 × 73 mmPanel, the printed circuit board in 3D

    Panel

    fablabbcn/smartcitizen-enclosures

    Enclosures for Smart Citizen

    630 parts19
  • 2 layers151 × 94 mmLED matrix Error-2026, the printed circuit board in 3D

    LED matrix Error-2026

    Jed0vcela/LED-matrix-Error-2026

    Kapesní zařízení s LED maticí 32×16, postavené na Raspberry Pi Pico (RP2040) s MicroPythonem. Samotné zařízení nabízí přes 20 vestavěných her a pomůcek; víc zařízení lze propojit řetězcem po UART pro hry pro dva hráče a…

    639 parts
  • 2 layers97 × 92 mmTinyDiversityRX5808 panelized, the printed circuit board in 3D

    TinyDiversityRX5808 panelized

    nppc/TinyDiversityRX5808

    Recording taken with Eachine Pro DVR integrated in to the EV100 goggles.

    640 parts7
  • 2 layers162 × 147 mmPanelized, the printed circuit board in 3D

    Panelized

    algnor/qc3-bc

    Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware

    626 partsGPL-3.0

Questions

How big is the Santas Microfactory - Scoring and Health PCB?

It measures 200 × 199.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Santas Microfactory - Scoring and Health use?

634 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Santas Microfactory - Scoring and Health KiCad files?

From the SharKingStudios/Santas-Microfactory repository on GitHub, at the commit this page was made from: the board is PCB/Santas Microfactory - Scoring and Health/Santas Microfactory - Scoring and Health.kicad_pcb and its schematic PCB/Santas Microfactory - Backplane/Santas Microfactory - Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Santas Microfactory - Scoring and Health design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).