2 layers173 × 85 mm
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL
2 layers
CNC
FabLabAQ/CNC- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 27
- Pads
- 82
- Tracks, vias
- 58, 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jan 2017
- Updated
- 21 Dec 2019
Overview
CNC is an open-source printed circuit board by FabLabAQ, from the FabLabAQ/CNC repository on GitHub. It is a 2-layer board with 13 parts on 27 nets, routed with 58 tracks and 4 vias.
It is built around the SN75174N and LM7805CT. Its parts include 5 connectors, 4 capacitors and 3 ICs. It belongs with the robots and motor control boards of this library.
Main components
2
SN75174N
DIP-160 0℃~+70℃ 4 4.75V~5.25V Driver DIP-16 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdParts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X05 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-5pol | P2, P3, P4, P5 |
| 2 | C | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C2, C3 |
| 2 | CP | Capacitors_ThroughHole:C_Radial_D5_L6_P2.5 | C1, C4 |
| 2 | SN75174N | Housings_DIP:DIP-16_W7.62mm_LongPads | U2, U3 |
| 1 | CONN_01X10 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-10pol | P1 |
| 1 | LM7805CT | Power_Integrations:TO-220 | U1 |
| 1 | RR8 | Resistors_ThroughHole:Resistor_Array_SIP8 | RR1 |
Questions
What parts does the CNC use?
13 parts, built around the SN75174N and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CNC KiCad files?
From the FabLabAQ/CNC repository on GitHub, at the commit this page was made from: the board is Differential driver KiCad/CNC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CNC design in my own project?
Its repository states no licence, so its author keeps all rights: ask FabLabAQ before reusing the design.
Similar boards
- 2 layers169.3 × 128 mm
PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers97.6 × 145.1 mm
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm
- 2 layers68 × 89 mm
ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17 - 2 layers100 × 49.7 mm
- 4 layers100 × 100 mm
