
SEU M 1.04
fablab-wue/piTelex.supplement
This project hold the additional files for the teletype project piTelex

This project hold the additional files for the teletype project piTelex
PiTelex TW39 2.1.0 is an open-source printed circuit board by fablab-wue, from the fablab-wue/piTelex.supplement repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 37 mm with 89 parts on 59 nets, routed with 369 tracks and 101 vias.
It is built around the R-78C5.0-1.0, TLP627(F) and BC817, with the BC807 and TIP42C among its other parts. Its parts include 26 resistors, 17 capacitors, 13 connectors, 6 ICs and 6 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C11, C12, C13, C15, C16 |
| 6 | 3K3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12, R16, R17 |
| 6 | Screw_Terminal_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3, J4, J10, J11, J12, J13 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP3, TP4, TP5, TP6, TP7 |
| 5 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R19, R22, R23 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | TLP627 | Package_DIP:DIP-4_W7.62mm | U1, U2, U3, U4 |
| 3 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R26 |
| 3 | Screw_Terminal_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1, J6, J9 |
| 2 | *BC338 | Package_TO_SOT_THT:TO-92 | Q2, Q3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 1N4007 | Diode_SMD:D_SMB | D2, D3 |
| 2 | 68R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3 |
| 1 | * | Capacitor_THT:C_Rect_L9.0mm_W4.2mm_P7.50mm_MKT | C7 |
| 1 | *100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | *1K 5W | Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P30.48mm | R24 |
| 1 | 10 | Potentiometer_THT:Potentiometer_Bourns_3299Z_Horizontal | RV1 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 100n X2 275...305V~ | Capacitor_THT:C_Rect_L16.5mm_W6.0mm_P15.00mm_MKT | C8 |
| 1 | 100u 6.3V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C5 |
| 1 | 100u 6.3V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C14 |
| 1 | 33u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C9 |
| 1 | 33u 35V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C6 |
| 1 | 33u 35V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C17 |
| 1 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | KiCad-Logo_5mm_SilkScreen | Symbol:KiCad-Logo_5mm_SilkScreen | KiCAD Logo |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U5 |
| 1 | R-78C5.0-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U6 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J7 |
| 1 | Screw_Terminal_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2 |
| 1 | Screw_Terminal_01x05 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J5 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Symbol_Highvoltage_Type1_CopperTop_Small | Symbol:Symbol_Highvoltage_Type1_CopperTop_Small | KiCAD Logo |
| 1 | TIP42C | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1 |
The 88 most common of 89 parts.

fablab-wue/piTelex.supplement
This project hold the additional files for the teletype project piTelex

fablab-wue/piTelex.supplement
This project hold the additional files for the teletype project piTelex


MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.



PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format



It measures 65 × 37 mm and has 2 copper layers, 1.6 mm thick.
89 parts, built around the R-78C5.0-1.0, TLP627(F), BC817 and BC807. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fablab-wue/piTelex.supplement repository on GitHub, at the commit this page was made from: the board is PCB_KiCad/piTelex_TW39_2.1.0/piTelex_TW39_2.1.0.kicad_pcb and its schematic PCB_KiCad/SEU-M_1.04/SEU-M_1.04.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).