Skip to the content
2 layers45 × 70 mmFabFlipDriver, the printed circuit board in 3D

Flip dot/flip digit stuff

Size
45 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
107
Nets
62
Pads
346
Tracks, vias
613, 108
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Jan 2023
Updated
1 Feb 2023

Overview

FabFlipDriver is an open-source printed circuit board by fablab-muenchen, from the fablab-muenchen/fab_flip repository on GitHub. It is a 2-layer board of 45 × 70 mm with 107 parts on 62 nets, routed with 613 tracks and 108 vias.

It is built around the 74HC595 and AO3401A. Its parts include 38 resistors, 32 transistors, 18 diodes, 7 connectors and 2 capacitors.

Main components

2

README

README.md

fab_flip

Flip dot/flip digit stuff

_

Parts

107
QtyValueFootprintReferences
3510kpkl_dipol:R_0603R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +19
162N7002Package_TO_SOT_SMD:SOT-23Q3, Q4, Q7, Q8, Q11, Q12, Q15, Q16, Q19, Q20, Q23, Q24, Q27, Q28, Q31, Q32
16AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q2, Q5, Q6, Q9, Q10, Q13, Q14, Q17, Q18, Q21, Q22, Q25, Q26, Q29, Q30
16DDiode_SMD:D_SOD-523D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
31Kpkl_dipol:R_0603R36, R37, R38
3Conn_01x02ownCon:WE_691403900002BJ5, J6, J7
2100npkl_dipol:C_0603C1, C2
274HC595Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1, U2
2Conn_01x08ownCon:WE_691403900008BJ3, J4
2Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1, J2
2LEDLED_SMD:LED_0603_1608MetricD1, D2
2TestPointTestPoint:TestPoint_Pad_D1.5mmTP2, TP3
1G***kibuzzard-63C33DE4kibuzzard-63C33DE4
1G***kibuzzard-63C33DF7kibuzzard-63C33DF7

Similar boards

  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 4 layers84 × 28.8 mmRgb led nametag-48x16, the printed circuit board in 3D

    Rgb led nametag-48x16

    TobleMiner/RGB-led-nametag

    A small 48x16 pixel wearable LED canvas

    189 parts7MIT
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers121 × 75.5 mmJlctest, the printed circuit board in 3D

    Jlctest

    cjheath/jlcbasic

    JLC Basic parts library for Kicad fetched and converted from EasyEDA

    46 parts5
  • 2 layers99.1 × 59.7 mmLaserHarp3 - Rev3.1, the printed circuit board in 3D

    LaserHarp3 - Rev3.1

    amonbenson/laserharp

    Setup a virtual environment and install the dependencies:

    134 parts1
  • 2 layers148 × 90 mmClock v2, the printed circuit board in 3D

    Clock v2

    bonnetn/nixie_clock

    Nixie tube clock

    230 parts
  • 2 layers193.5 × 133.9 mmKeyboard left, the printed circuit board in 3D

    Keyboard left

    jasonlaguidice/TKL-Split-Keyboard

    Board edge fillet plugin used: https://github.com/tywtyw2002/FilletEdge

    232 parts

Questions

How big is the FabFlipDriver PCB?

It measures 45 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FabFlipDriver use?

107 parts, built around the 74HC595 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FabFlipDriver KiCad files?

From the fablab-muenchen/fab_flip repository on GitHub, at the commit this page was made from: the board is Electric/PCBs/fabFlipDriver/fabFlipDriver.kicad_pcb and its schematic Electric/PCBs/fabFlipDriver/fabFlipDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FabFlipDriver design in my own project?

Its repository states no licence, so its author keeps all rights: ask fablab-muenchen before reusing the design.