4 layers56.5 × 99.8 mm
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0
2 layers26 × 27 mm
Jlink adapter
fabiobaltieri/jlink-adapter- Size
- 26 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 45
- Pads
- 140
- Tracks, vias
- 272, 67
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jan 2025
- Updated
- 31 Jan 2025
Overview
Jlink adapter is an open-source printed circuit board by fabiobaltieri, from the fabiobaltieri/jlink-adapter repository on GitHub. It is a 2-layer board of 26 × 27 mm with 38 parts on 45 nets, routed with 272 tracks and 67 vias.
It is built around the TC2030-IDC-NL. Its parts include 12 resistors, 8 capacitors, 5 diodes, 4 ICs and 4 connectors. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
1Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | balto:R_0402_Worthington | R2, R3, R5, R6, R10 |
| 5 | 220 | balto:R_0402_Worthington | R1, R4, R7, R8, R9 |
| 3 | 1u | balto:C_0402_Worthington | C1, C3, C6 |
| 2 | 100k | balto:R_0402_Worthington | R11, R12 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 100n | balto:C_0402_Worthington | C5, C10 |
| 2 | Green | balto:LED_AA3528 | D3, D5 |
| 2 | Red | balto:LED_AA3528 | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 2 | TPS7A0333DBVR | Package_TO_SOT_SMD:SOT-23-5 | U2, U4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical_SMD | J3 |
| 1 | EZmate-4 | balto:EZmate-4 | J1 |
| 1 | LOGO | balto:paw | G*** |
| 1 | STM32C011F6Ux | Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm | U5 |
| 1 | TC2030-IDC-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | TPS7A0318DBVR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Yellow | balto:LED_AA3528 | D4 |
Questions
How big is the Jlink adapter PCB?
It measures 26 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jlink adapter use?
38 parts, built around the TC2030-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jlink adapter KiCad files?
From the fabiobaltieri/jlink-adapter repository on GitHub, at the commit this page was made from: the board is hardware/jlink-adapter.kicad_pcb and its schematic hardware/jlink-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jlink adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask fabiobaltieri before reusing the design.
Similar boards
- 2 layers
- 4 layers84.5 × 129.5 mm
- 2 layers109 × 71 mm
- 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 6 layers65 × 112 mm
BitaxeGT
bitaxeorg/BitaxeGT
Bitaxe Gamma Turbo 2x BM1370 ASIC ESP32 powered Bitcoin miner
187 parts70CERN-OHL-S-2.0 - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 2 layers178.6 × 99.4 mm
Quefrency right-65
keebio/quefrency-rev1-pcb
Quefrency Rev. 1 Keyboard PCB =============================
162 parts45MIT