2 layers50 × 98 mm
Stitched capcoupler
F6ITU/Capacitive_coupler
Petit coupleur capacitif (ou "tap" en franglais) destiné à prélever une faible portion d'énergie dans un circuit HF de puissance.
30 parts3
2 layers50 × 32.5 mm
CapCoupler
F6ITU/Capacitive_coupler3Petit coupleur capacitif (ou "tap" en franglais) destiné à prélever une faible portion d'énergie dans un circuit HF de puissance.
- Size
- 50 × 32.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 3
- Pads
- 25
- Tracks, vias
- 5, 115
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Oct 2024
- Updated
- 2 Oct 2024
Overview
CapCoupler is an open-source printed circuit board by F6ITU, from the F6ITU/Capacitive_coupler repository on GitHub. It is a 2-layer board of 50 × 32.5 mm with 10 parts on 3 nets, routed with 5 tracks and 115 vias.
Its parts include 3 connectors and 2 capacitors.
README
README.mdCapcoupler
Petit coupleur capacitif (ou "tap" en franglais) destiné à prélever une faible portion d'énergie dans un circuit HF de puissance.
Selon la puissance émise, les condensateurs utilisés doivent être capable de supporter entre 500 et 2000V. Capas porcelaine ou mica "cms" vivement conseillées. Caveat emptor
Comparativement aux coupleurs inductifs ou capacitifs, ce genre de montage est "relativement" indépendant de la fréquence de travail. Il est donc utilisable sans grande déterioration des performances entre 1 et 500 MHz.
En revanche, on ne peut espérer la moindre directivité... ce n'est pas un réflectomètre.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | N Conn | SMA_PINS:SMA_EDGE_NRW | J1, J2 |
| 1 | 2.2n | ATC_B:ATC_500_HandSoldering | C2 |
| 1 | 2.2p | ATC_B:ATC_500_Dual_HandSoldering | C1 |
| 1 | sma | SMA_PINS:SMA_EDGE_NRW | J3 |
The 5 most common of 10 parts.
Questions
How big is the CapCoupler PCB?
It measures 50 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CapCoupler use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CapCoupler KiCad files?
From the F6ITU/Capacitive_coupler repository on GitHub, at the commit this page was made from: the board is CapCoupler.kicad_pcb and its schematic CapCoupler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CapCoupler design in my own project?
Its repository states no licence, so its author keeps all rights: ask F6ITU before reusing the design.
More from F6ITU/Capacitive_coupler
1Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0