

Atari2600-Cartridge
Atari 2600 replacement parts and expansions
- Size
- 41.3 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 28
- Pads
- 77
- Tracks, vias
- 117, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Mar 2023
- Updated
- 15 Jan 2024
Overview
Atari2600-Cartridge is an open-source printed circuit board by f1ac0, from the f1ac0/Atari2600 repository on GitHub. It is a 2-layer board of 41.3 × 45.7 mm with 7 parts on 28 nets, routed with 117 tracks and 18 vias.
It is built around the 74LVC1G04Z. Its parts include 2 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdAtari2600
Inside the lot I bought to get my first C64 was also and Atari 2600. It was also listed as "Untested", and it was obviously salvaged from a flood considering the mud and rust that was inside the case. It came without any game or accessory.
While waiting for the system to dry after a complete clean and rust removal I found the useful projects below to help me start with this system I didn't know anything about.
- First I needed some game so I put together a ROM cartridge on a breadboard and created a PCB from it.
- Then not a single TV receiver I had could tune the video and audio signals correctly, but a BT848 PCTV PCI card. The mod by Eddy Foucault worked perfectly, I made my own version with CMS components and 5v only.
- At last I removed the regulator to power the console from a modern 5V power source.
In this repository are the PCBs I created or modified for my own needs.
Disclaimer and Acknowledgements
This is a hobbyist project, it comes with no warranty and no support. Also remember that the 40 years old hardware may fail because of such expansions.
I publish my work under the CC-BY-NC-SA license, unless stated otherwise. Thanks to everyone who share their knowledge and creations.
Useful links
Cartridge
- https://github.com/sarweiler/a2k6-cart
- https://github.com/robinhedwards/UnoCart-2600
- https://github.com/DirtyHairy/UnoCart-2600/releases
- https://github.com/rglenn/unocart2600-pcb
- https://github.com/Al-Nafuur/United-Carts-of-Atari
Video SECAM Atari 2600 to RGB SCART TV
Video SECAM to PAL
Video PAL/NTSC to composite
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 10k | Resistor_SMD:R_Array_Concave_4x0603 | RN1 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm | U1 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Atari_2600_Cartridge_Port | Sassa:Atari2600_Cartridge_2x12_P2.54mm | J1 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
More from f1ac0/Atari2600
3- 2 layers20.3 × 24.1 mm

- 2 layers41.3 × 45.7 mm

- 2 layers41.3 × 45.7 mm

Similar boards
- 4 layers66.3 × 40.2 mm

Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers83.1 × 92.5 mm

- 2 layers101.6 × 137.4 mm

- 2 layers97 × 79.5 mm

MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
104 parts35Unlicense - 4 layers88.9 × 20.3 mm

- 2 layers25.4 × 78.2 mm

Sd board
w0ts/optimist
Optimist: an open, modular firmware platform for the M-VAVE FM-1 (from SLOOP / Felucca)
28 parts32GPL-3.0 - 4 layers30 × 53.5 mm

Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
54 parts20 - 4 layers178 × 99 mm

FreeDSP OCTAVIA
freeDSP/freeDSP-OCTAVIA
8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input
529 parts19CC-BY-SA-4.0
Questions
How big is the Atari2600-Cartridge PCB?
It measures 41.3 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atari2600-Cartridge use?
7 parts, built around the 74LVC1G04Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atari2600-Cartridge KiCad files?
From the f1ac0/Atari2600 repository on GitHub, at the commit this page was made from: the board is Atari2600-Cartridge-27C512/Atari2600-Cartridge.kicad_pcb and its schematic Atari2600-Cartridge-27C512/Atari2600-Cartridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atari2600-Cartridge design in my own project?
Its repository states no licence, so its author keeps all rights: ask f1ac0 before reusing the design.