

.kicad_pcb
- Size
- 211.5 × 103.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 195
- Nets
- 28
- Pads
- 748
- Tracks, vias
- 1,972, 59
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 14 Sep 2016
- Updated
- 14 Sep 2016
Overview
.kicad_pcb is an open-source printed circuit board by ExploreEmbedded, from the ExploreEmbedded/Motor-Driver-L293D repository on GitHub. It is a 2-layer board of 211.5 × 103.3 mm with 195 parts on 28 nets, routed with 1,972 tracks and 59 vias.
It is built around the MAX232N, L293D and LM1117-3.3, with the LM7805 among its other parts. Its parts include 57 connectors, 37 resistors, 37 diodes, 34 ICs and 24 capacitors.
Main components
4MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsL293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor DriverLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMotor-Driver-L293D
Parts
195| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | LED | LED-3MM | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2 +21 |
| 25 | R | R4 | R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R3, R3, R3, R3, R3, R4 +9 |
| 24 | 1uF | SM1206 | C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C3, C3, C3, C3 +8 |
| 20 | CONN_1 | 1pin | P5, P5, P5, P5, P5, P7, P7, P7, P7, P7, P8, P8, P8, P8, P8, P9 +4 |
| 12 | LM1117 | lm1117_xl | U1, U1, U1, U1, U1, U1, U3, U3, U3, U3, U3, U3 |
| 12 | R | SM1206 | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2 |
| 11 | CONN_4 | SIL-4 | P1, P1, P1, P1, P1, P1, P3, P3, P3, P3, P3 |
| 6 | CONN_3 | BARREL_JACK | K1, K1, K1, K1, K1, K1 |
| 6 | DB9 | DB9FC | J1, J1, J1, J1, J1, J1 |
| 6 | MAX232 | SO16E_max232_xl | U4, U4, U4, U4, U4, U4 |
| 6 | ZIGBEE_XL | zigbee_xl | U2, U2, U2, U2, U2, U2 |
| 5 | CONN_2 | bornier2 | P4, P4, P4, P4, P4 |
| 5 | CONN_2 | SIL-2 | P6, P6, P6, P6, P6 |
| 5 | L293D | DIP-16__300_ELL | IC1, IC1, IC1, IC1, IC1 |
| 5 | LM7805 | LM78XX | U1, U1, U1, U1, U1 |
| 5 | Motar1 | bornier2 | P1, P1, P1, P1, P1 |
| 5 | motar2 | bornier2 | P2, P2, P2, P2, P2 |
More from ExploreEmbedded/Motor-Driver-L293D
2- 2 layers99.2 × 210.1 mm

- 2 layers49 × 41.5 mm

Similar boards
- 2 layers

- 2 layers100 × 75 mm

Ultrasonic radar atmega128 routed
DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML
All production files have been generated in manufacturing/: - Gerber Layers (RS-274X): Copper, solder masks, silkscreen, and board edge cuts (manufacturing/gerbers/) - Excellon Drill Files: Plated and non-plated drill…
18 parts - 2 layers51.7 × 79.4 mm

Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver
26 parts5GPL-2.0 - 2 layers

- 2 layers46.7 × 63.1 mm

- 4 layers78.3 × 65.8 mm

- 2 layers273.9 × 208.8 mm

Placa todo en uno
NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).
50 parts1 - 2 layers97 × 100.1 mm

Questions
How big is the .kicad_pcb PCB?
It measures 211.5 × 103.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the .kicad_pcb use?
195 parts, built around the MAX232N, L293D, LM1117-3.3 and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the .kicad_pcb KiCad files?
From the ExploreEmbedded/Motor-Driver-L293D repository on GitHub, at the commit this page was made from: the board is Hardware Design/.kicad_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the .kicad_pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask ExploreEmbedded before reusing the design.