2 layers144 × 144 mm
2 layers302.5 × 109.5 mm
Paddle65
evyd13/paddle65-canoe-pcb4- Size
- 302.5 × 109.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 185
- Nets
- 115
- Pads
- 716
- Tracks, vias
- 1,027, 129
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Mar 2022
- Updated
- 6 Mar 2022
Overview
Paddle65 is an open-source printed circuit board by evyd13, from the evyd13/paddle65-canoe-pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 302.5 × 109.5 mm with 185 parts on 115 nets, routed with 1,027 tracks and 129 vias.
It is built around the ATMEGA32U4, USBLC6-2SC6 and SK6812MINI-E. Its parts include 87 switches, 70 diodes, 8 capacitors, 6 resistors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA32U4
UncategorisedUnknown maker
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdPaddle65
This PCB design has not been tested yet
About
The Paddle65 is a no-frills replacement PCB for the Canoe (gen 1) by Percent Studios. It should fit the case without any modifications.
Manufacturing
You know the drill ;)
Parts
185| Qty | Value | Footprint | References |
|---|---|---|---|
| 70 | D | Keeb_components:D_0805 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +54 |
| 62 | KEYSW | Keeb_switches:CHERRY_PLATE_100H | K1, K2, K10, K11, K12, K13, K14-1, K15, K17, K18, K19, K20, K21, K22, K23, K24 +46 |
| 8 | KEYSW | Keeb_switches:CHERRY_PLATE_150H | K16, K43-1, K61-1, K62-2, K63-1, K70-2, K71-1, K72-1 |
| 7 | KEYSW | Keeb_switches:CHERRY_PLATE_125H | K31-1, K46-1, K61, K62, K63, K70, K71 |
| 6 | 0.1u | Keeb_components:C_0805 | C1, C2, C3, C4, C7, C8 |
| 2 | 10k | Keeb_components:R_0805 | R3, R4 |
| 2 | 22 | Keeb_components:R_0805 | R1, R2 |
| 2 | 470 | Keeb_components:R_0805 | R5, R6 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_225H | K44, K46 |
| 2 | KEYSW | Keeb_switches:CHERRY_PLATE_175H | K31, K58 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_700H_F | K67-1, K67-2 |
| 2 | LED | Keeb_switches:CHERRY_MX_LED_neo | L1, L1-1 |
| 2 | SK6812MINI-E | Keeb_components:LED_SK6812MINI-E | RGB1, RGB2 |
| 1 | 10u | Keeb_components:C_0805 | C5 |
| 1 | 16mhz | Keeb_components:XTAL_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | X1 |
| 1 | 1u | Keeb_components:C_0805 | C6 |
| 1 | ATmega32U4 | Keeb_components:MCU_ATMEGA32U4-AU | U1 |
| 1 | ISP | Keeb_components:CONN_isp_standard | J2 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_625H_F | K67 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_200H_V | K44-1 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_200H | K14 |
| 1 | LOGO | Keeb_components:logo_new | G*** |
| 1 | LOGO | Keeb_components:GRAPHIC_ghost_mask | G*** |
| 1 | LOGO | Keeb_components:oshw | G*** |
| 1 | Polyfuse_Small | Keeb_components:R_0805 | F1 |
| 1 | SW_PUSH | Keeb_components:SWITCH_SPST_TL3342 | SW1 |
| 1 | UDB | Keeb_components:CONN_JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | USBLC6-2SC6 | Keeb_components:PACKAGE_SOT-23-6 | U2 |
| 1 | USB_mini_micro_B | Keeb_components:CONN_UX60SC-MB-5S8 | J1 |
Similar boards
- 2 layers62 × 62 mm
- 2 layers100 × 95.3 mm
- 2 layers717.7 × 1,373.5 mm
- 2 layers285 × 95 mm
- 2 layers316.4 × 95.2 mm
- 2 layers449.1 × 144.3 mm
Chili master
silitekmodder/Chili-master
Re-uploaded Chili PCB for the Cherry G80-3000/G81-3000 series keyvboards (NOT MINE)
465 parts3CC0-1.0 - 2 layers302 × 93.5 mm
Questions
How big is the Paddle65 PCB?
It measures 302.5 × 109.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Paddle65 use?
185 parts, built around the ATMEGA32U4, USBLC6-2SC6 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Paddle65 KiCad files?
From the evyd13/paddle65-canoe-pcb repository on GitHub, at the commit this page was made from: the board is pcb/paddle65.kicad_pcb and its schematic pcb/paddle65.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Paddle65 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).