Skip to the content
2 layers50 × 100 mmEv LTZ, the printed circuit board in 3D

LTZ1000 reference schematic and board (kicad)

Size
50 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
20
Pads
79
Tracks, vias
214, 0
Pours
5
Routed
Yes
KiCad
KiCad 4
Created
15 Sep 2017
Updated
17 Dec 2017

Overview

Ev LTZ is an open-source printed circuit board by evetere, from the evetere/eV-LTZ1000 repository on GitHub. It is a 2-layer board of 50 × 100 mm with 38 parts on 20 nets, routed with 214 tracks and 0 vias.

It is built around the BD139 and LTZ1000ACH. Its parts include 11 resistors, 8 capacitors, 7 connectors, 4 diodes and 1 IC.

Main components

2

README

README.md

eV-LTZ1000

LTZ1000 reference schematic and board (kicad)

LTZ-1000

Parts

38
QtyValueFootprintReferences
4.1uFCapacitors_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C1, C3, C4, C6
20.022uFCapacitors_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C2, C7
21N4148Diodes_THT:D_A-405_P7.62mm_HorizontalD1, D2
21N5819Diodes_THT:D_DO-41_SOD81_P10.16mm_HorizontalD3, D6
225kResistors_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_HorizontalR4.1, R4.2
247uFCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC5, C10
270kResistors_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_HorizontalR2, R3
1100kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR4
110kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR8
110kVaristors:RV_Disc_D7_W3.4_P5TH1
1120Resistors_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_HorizontalR1
11MResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR7
11kResistors_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_HorizontalR5
11kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR6
1400kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR9
1BD139TO_SOT_Packages_THT:TO-126_VerticalQ1
1LT1013N8Housings_DIP:DIP-8_W7.62mmU1
1LTZ1000TO_SOT_Packages_THT:TO-5-8_PD5.08LTZ1000-1
1SENSE+Measurement_Points:Measurement_Point_Round-TH_BigP6
1SENSE-Measurement_Points:Measurement_Point_Round-TH_BigP5
1TEMP NTCConnectors_Samtec:SL-102-X-XX_1x02P2
1TEST_HEATERConnectors:PINTSTW1
1TEST_SENSEConnectors:PINTSTW2
1VH+Connectors:1pinP4
1VH-Connectors:1pinP3
1VIN+Connectors:1pinP1
1VIN-Connectors:1pinP7

The 36 most common of 38 parts.

Similar boards

  • 2 layers34.5 × 56 mmMu ltz, the printed circuit board in 3D

    Mu ltz

    marcoreps/LTZmu

    Low cost 10V transfer standard

    46 parts20
  • 2 layers49.5 × 42.5 mmHp ref, the printed circuit board in 3D

    Hp ref

    cellularmitosis/hp-03458-66509-clone

    A clone of the LTZ1000 reference board from the HP 3458A 8.5-digit multimeter

    46 parts12MIT
  • 2 layers48.9 × 45.7 mmPxref24, the printed circuit board in 3D

    Pxref24

    cellularmitosis/px-ref

    An LTZ1000-based 7V reference (circuit by Andreas)

    78 parts11MIT
  • 2 layers79.9 × 49.9 mmDr frank ltz1000, the printed circuit board in 3D

    Dr frank ltz1000

    cellularmitosis/dr-frank-ltz1000

    Dr. Frank's LTZ1000 reference

    57 parts9
  • 2 layers79.9 × 50 mmLtz1000, the printed circuit board in 3D

    Ltz1000

    opendcm/opendcm

    Open DC multimeter

    41 parts12
  • 2 layers50.2 × 44.5 mmA9ref, the printed circuit board in 3D

    A9ref

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    25 parts2
  • 2 layersESP32Anglerfish, the printed circuit board in 3D

    ESP32Anglerfish

    Matchboxscope/Matchboxscope

    ESP32-based mini microscope for fluidic device observation

    7 parts103
  • 2 layers49.8 × 63 mmPiHat, the printed circuit board in 3D

    PiHat

    joelkoz/QwicktracePCB

    UI for PCB smart exposure table

    15 parts16MIT

Questions

How big is the Ev LTZ PCB?

It measures 50 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ev LTZ use?

38 parts, built around the BD139 and LTZ1000ACH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ev LTZ KiCad files?

From the evetere/eV-LTZ1000 repository on GitHub, at the commit this page was made from: the board is ev-LTZ.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ev LTZ design in my own project?

Its repository states no licence, so its author keeps all rights: ask evetere before reusing the design.