2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers
LEDLightHardware
evarty/uCLEDLightControllerLED Light Controller
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 9
- Pads
- 23
- Tracks, vias
- 46, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Apr 2016
- Updated
- 22 Apr 2016
Overview
LEDLightHardware is an open-source printed circuit board by evarty, from the evarty/uCLEDLightController repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 7 parts on 9 nets, routed with 46 tracks and 0 vias.
Its parts include 3 capacitors, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdThis is the hardware and software for a simply Attiny45 based TM1803 LED strip. It only provides off and white light. The hardware files are KiCAD and currently only include a minimal schematic.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P1, P2 |
| 1 | 10u | Capacitors_ThroughHole:C_Radial_D5_L11_P2.5 | C3 |
| 1 | 22u | Capacitors_ThroughHole:C_Radial_D5_L11_P2.5 | C2 |
| 1 | ATTINY45-P | Housings_DIP:DIP-8_W7.62mm_LongPads | IC1 |
| 1 | LM7805(Has_numbers) | Power_Integrations:TO-220 | U1 |
| 1 | u10 | Capacitors_ThroughHole:C_Disc_D6_P5 | C1 |
Questions
What parts does the LEDLightHardware use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDLightHardware KiCad files?
From the evarty/uCLEDLightController repository on GitHub, at the commit this page was made from: the board is Hardware/LEDLightHardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDLightHardware design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
